符号の規則

When a beam is subjected to a load, it experiences three categories of internal forces: normal force, shear force, and bending moment. Normal force acts perpendicular to the cross-section and causes tension or compression. Shear force acts tangentially to the cross-section, and bending moment is the rotational effect created by external forces. Understanding these forces is essential for structural analysis and design.

The normal force sign convention depends on whether the force creates tension or compression. A positive normal force creates tension in the object, while a negative normal force generates compression. This convention is applied consistently when analyzing internal forces using the method of sections to determine how the beam responds to loading.

Shear force sign convention is based on the direction of forces acting tangentially on each side of the section. If the force on the left side is directed downward and the force on the right side is directed upward, the shear force is positive, resulting in clockwise rotation. Reversed directions produce negative shear force with counterclockwise rotation.

Bending moment sign convention is determined by the curvature the beam experiences. A positive bending moment corresponds to upward concave curvature, while a negative bending moment corresponds to downward convex curvature. This convention helps engineers understand the deformation pattern and design appropriate structural elements to resist bending.

The method of sections allows engineers to analyze internal forces by conceptually cutting the beam and examining the forces acting on each side of the section. Since internal forces occur in pairs with directions depending on which side is analyzed, this method combined with sign convention enables accurate determination of normal forces, shear forces, and bending moments throughout the beam.

Sign convention is essential for structural analysis because it provides a consistent framework for interpreting internal forces and moments. By establishing clear rules for positive and negative values based on force direction and beam response, engineers can predict failure modes, understand structural behavior under various loads, and design robust structural elements.

Internal forces—normal, shear, and bending moment—work together to describe the complete stress state within a beam. Normal force indicates tension or compression, shear force shows tangential stress, and bending moment reveals rotational effects. Together, they provide comprehensive insight into how beams deform and fail, enabling engineers to create effective designs.