Question 1

What is coprecipitation and why does it occur?

Accepted Answer

Coprecipitation is the contamination of a precipitate by otherwise soluble species. It occurs through multiple mechanisms including surface adsorption on colloidal precipitates, isomorphous replacement within crystal lattices, occlusion of foreign ions during crystal growth, and mechanical entrapment of solution pockets between adjacent crystals. Each process introduces unwanted impurities that compromise precipitate purity.

Question 2

How does surface adsorption cause coprecipitation in colloidal precipitates?

Accepted Answer

In colloidal precipitates like barium sulfate, surface adsorption creates two layers: a primary layer of adsorbed ions and a secondary layer of counterions. For example, barium sulfate develops a primary layer of barium ions and a secondary layer of nitrate counterions, resulting in contamination by barium nitrate. This electrostatic layering mechanism is characteristic of colloidal precipitate contamination.

Question 3

What is isomorphous replacement and how does it lead to mixed crystals?

Accepted Answer

Isomorphous replacement occurs when ions in a crystal lattice are substituted by similar ions of comparable charge and size. During cadmium sulfide precipitation, manganese ions can replace cadmium to form mixed crystals. Similarly, potassium ions can replace magnesium in magnesium ammonium phosphate. This substitution creates contaminated mixed-crystal compositions that compromise analytical accuracy.

Question 4

How can isomorphous replacement and occlusion be prevented or minimized?

Accepted Answer

Mixed-crystal formation from isomorphous replacement can be prevented by removing the interfering ion from solution or selecting a different precipitant. Occlusion, where foreign ions are trapped within the growing lattice, can be minimized by slowing the precipitation rate. Rapid dissolution and reprecipitation in fresh solvent can also remove occluded impurities, improving precipitate purity for gravimetric analysis.

Question 5

What is the difference between occlusion and mechanical entrapment?

Accepted Answer

Occlusion traps foreign ions within the growing crystal lattice during precipitation. Mechanical entrapment, by contrast, traps pockets of solution between adjacent crystals as they form. Both mechanisms introduce contaminants, but they operate at different scales: occlusion at the molecular level within crystals and mechanical entrapment at the crystal-to-crystal interface level.

Question 6

Why is precipitation rate important in controlling coprecipitation?

Accepted Answer

Slow precipitation reduces occlusion by allowing ions to arrange more selectively into the crystal structure, minimizing foreign ion incorporation. Rapid precipitation increases the likelihood of trapping impurities within or between crystals. Controlling precipitation kinetics is therefore essential for obtaining pure precipitates in gravimetric analysis and ensuring reliable analytical results.

Question 7

How can rapid dissolution and reprecipitation remove coprecipitated impurities?

Accepted Answer

Rapid dissolution of the contaminated precipitate followed by reprecipitation in clean, fresh solvent removes mechanically entrapped impurities and reduces occlusion. This process allows the precipitate to recrystallize with improved purity because the fresh solvent lacks the original interfering ions. Reprecipitation is a practical technique for purifying gravimetric samples before washing, drying, and ignition.

共沈の種類