分流器

In a parallel circuit, source current distributes among resistors in inverse proportion to their resistances. Using Kirchhoff's current law, the sum of individual currents equals the source current. A resistor with lower resistance receives more current, while higher resistance receives less. This current division principle is fundamental to analyzing parallel circuits and predicting current flow through each branch.

In parallel connections, all resistors experience the same voltage across their terminals. Using Ohm's law, the current through each resistor is determined by dividing this equal voltage by the individual resistance value. This equal voltage distribution is a defining characteristic of parallel circuits and enables straightforward current calculations for each branch.

The equivalent resistance of parallel resistors is found by taking the reciprocal of the sum of individual reciprocals. For two resistors, multiply their values and divide by their sum. This equivalent resistance represents a single resistor that could replace the parallel combination while maintaining the same current-voltage characteristics in the circuit.

Conductance is the reciprocal of resistance and provides a convenient parameter for analyzing circuits. In parallel configurations, the equivalent conductance equals the sum of individual conductances, mirroring how resistances add in series. This approach simplifies calculations when working with multiple parallel resistors by avoiding complex reciprocal operations.

In series resistors, equivalent conductance is calculated as the product of individual conductances divided by their sum. In parallel resistors, equivalent conductance is simply the sum of individual conductances. This difference reflects the inverse relationship between how resistances and conductances combine in series versus parallel arrangements.

Current division allows engineers to predict how current distributes across parallel branches without analyzing the entire circuit. This principle simplifies complex network analysis by enabling quick calculations of individual branch currents. Understanding current division is essential for designing circuits with specific current requirements and for troubleshooting parallel circuit configurations.

Replacing multiple parallel resistors with their equivalent resistance maintains the same current-voltage characteristics at the circuit terminals. This simplification reduces circuit complexity while preserving the original network's response to voltage and current inputs. Engineers use this technique to analyze and design electrical circuits more efficiently without altering the circuit's fundamental behavior.