固体–固体溶液

Eutectic composition is the specific mixture of two solids A and B that has the lowest melting point of any possible combination. A liquid of this composition freezes at a single temperature, and the corresponding solid melts at the lowest temperature without changing composition. This unique composition is represented by an isopleth line on the temperature-composition phase diagram.

As the system cools, pure solid B begins to separate from the solution, enriching the remaining liquid in component A. This separation continues with further cooling, progressively removing solid B and concentrating A in the liquid phase. Eventually, the liquid fraction decreases until it solidifies completely, forming a two-phase mixture of pure A and B.

At higher temperatures, the thermal energy overcomes the immiscibility of solids A and B, allowing them to dissolve completely and form a single-phase liquid solution. This demonstrates that temperature is a critical factor in determining whether components remain as separate solids or mix as a homogeneous liquid, as shown in the temperature-composition phase diagram.

The eutectic halt is a region of constant temperature that occurs during solidification of a eutectic composition mixture. As the eutectic liquid cools and begins to solidify, the temperature remains constant throughout the phase change. This contrasts with typical phase changes where temperature decreases continuously during freezing.

During cooling, the liquid phase becomes progressively enriched in component A as pure solid B separates from the solution. The composition of the remaining liquid shifts along the phase diagram toward higher A content. This enrichment continues until the liquid reaches the eutectic composition, at which point it solidifies at constant temperature.

In solid-solid solutions, the two components are mutually insoluble in the solid state but form miscible liquids at higher temperatures. This creates a phase diagram where low temperatures show separate pure solids, while high temperatures show a single liquid phase. Liquid-Solid Solutions, by contrast, involve different solubility relationships between solid and liquid phases.

The eutectic composition has the lowest melting point of any mixture of the two components. Pure A and pure B each have higher individual melting points than the eutectic mixture. This depression in melting point is a characteristic feature of eutectic systems and relates to freezing point depression and boiling point elevation phenomena in multicomponent systems.