配電

An electric power system consists of power plants, generators, transformers, and substations working together to deliver energy. Power plants convert various forms of energy—coal, gas, nuclear, water, and wind—into electrical energy using three-phase generators. Transformers and substations then step up or step down voltage levels to efficiently transmit and distribute power to consumers.

Step-up transformers increase voltage and decrease current for efficient long-distance transmission. High voltage reduces energy losses during transmission over long distances. Generator step-up transformers at power plant substations are essential for minimizing power loss and enabling economical delivery of electricity across the transmission network.

The subtransmission system uses step-down transformers and lines to connect bulk power substations to distribution substations. These transformers reduce high transmission voltages to levels suitable for distribution, often supplying large industrial loads or specific regions. Distribution substations then further decrease voltages to primary distribution levels for local delivery.

Primary distribution transfers electricity from distribution substations to distribution transformers, which step down voltage to secondary levels. Secondary distribution then connects to customer premises via service conductors, providing power for residential, commercial, and light industrial use. Service conductors pass through meters for billing before reaching service panels on customer premises.

Primary distribution feeders are divided into several three-phase sections, sometimes with single-phase laterals connected via fuses. Feeders and laterals, whether overhead or underground, run along streets to supply distribution transformers. These transformers are installed on poles, pads, or in vaults and further reduce voltage to secondary levels for end users.

Distribution substations protect the system with circuit breakers and surge arresters. These devices safeguard against electrical faults and overvoltages while stepping down subtransmission voltages to primary distribution levels. Circuit breakers and surge arresters work together to ensure distribution reliability and automation throughout the network.

Distribution transformers are installed on poles, pads, or in vaults throughout the distribution network. These transformers in distribution system reduce secondary voltage levels and channel energy through secondary mains and service conductors to customer loads. They are the final voltage reduction stage before electricity reaches residential, commercial, and light industrial consumers.