方向リレー

Forward-direction faults occur to the right of the current transformer, causing fault current to lag bus voltage by nearly 90 degrees. Reverse-direction faults occur to the left, causing fault current to lead bus voltage by almost 90 degrees. Directional relays use this phase angle difference to distinguish fault location and determine whether to trip or block the breaker.

A directional relay operates in series with an overcurrent relay to provide selective protection. The directional relay energizes the breaker trip coil only when two conditions are met: the current transformer's secondary current exceeds the overcurrent relay pickup value, and the current is in the forward-tripping direction. This dual-condition approach prevents unnecessary trips from reverse faults.

Directional relays use reference voltage and current inputs to establish trip and block regions based on the phase angle between current and voltage. The reference voltage typically comes from the bus or line-to-ground voltage, while current comes from the current transformer. This angle-based logic enables the relay to distinguish between forward and reverse fault conditions accurately.

Electromechanical directional relays operate like watt-hour meters, using voltage and current coils with a rotating disc element. Forward-direction faults produce maximum positive torque on the disc, closing relay contacts. Reverse faults generate maximum negative torque, which is restrained by mechanical stops, preventing unwanted trips.

In two-source systems, directional relays overcome coordination challenges by accurately distinguishing fault direction and location. They ensure uninterrupted service to loads during faults by enabling precise fault isolation. This capability maintains system stability and minimizes disruption when multiple power sources feed the same line.

A forward fault is indicated when the fault current lags the bus voltage by approximately 90 degrees. This phase relationship occurs for faults downstream of the current transformer. The directional relay recognizes this specific angle relationship and permits the trip signal to reach the breaker.

Modern digital directional relays offer advanced features including self-monitoring, communication capabilities, and precise timing adjustments. These enhancements improve reliability and effectiveness compared to electromechanical designs. Digital relays enable better coordination across protection zones and provide real-time system diagnostics for improved fault response.