骨材の嵩密度

Bulk density measures the mass of aggregate particles within a unit volume, including void spaces between them. It is typically expressed in pounds per cubic foot. This measurement is crucial when aggregates are batched by volume and helps convert quantities from mass to volume in concrete mix design.

Aggregates of a single size can only be compacted to a limited degree. When smaller particles are introduced into the gaps between larger particles, they fill voids and increase bulk density significantly. Optimal bulk density of a mixed aggregate is reached when fine aggregates constitute approximately 35 to 40 percent of the total aggregate mass.

Rounded aggregates pack with fewer voids than angular ones, resulting in higher bulk density for rounded particles. The shape of aggregates directly affects how efficiently they arrange in space. Angular aggregates leave more void spaces between particles, reducing overall bulk density compared to their rounded counterparts.

Surface moisture on aggregates pushes adjacent particles apart, hindering dense packing and reducing bulk density. This moisture content and bulking of aggregate is an important consideration during concrete batching. Dry aggregates achieve better compaction and higher bulk density than those with surface moisture present.

Aggregates with bulk density less than 70 lb/ft³ are classified as lightweight, while those exceeding 130 lb/ft³ are considered heavyweight. Natural mineral aggregates like sand and gravel typically exhibit bulk density ranging from 95 to 100 lb/ft³ and produce normal weight concrete with a unit weight of about 150 lb/ft³.

Void space percentage is calculated using bulk density, bulk specific gravity in the saturated surface-dry state, and unit mass of water. The amount of void spaces indicates the volume of mortar required to fill gaps between coarse aggregates in the concrete mix. This calculation is essential for accurate concrete mix design and material proportioning.

Aggregates that are compacted densely achieve higher bulk density compared to loosely compacted aggregates. The degree of compaction directly influences how tightly particles arrange and how many voids remain. Dense compaction minimizes void spaces, resulting in greater mass per unit volume and improved concrete performance.