コンクリートの空隙率

Cement paste traps water in three forms: gel water, which fills pores within the cement gel and comprises about 28% of the gel volume; capillary water, which occupies larger pores when excess water is present; and combined water, which chemically bonds with hydration products and represents approximately 23% of dry cement mass. These water forms collectively determine the paste's porosity and strength characteristics.

The water-to-cement ratio is crucial because excess water creates more capillary pores, which constitute about 18.5% of the original cement volume. Higher water-to-cement ratios result in increased porosity and potentially weaker hardened cement paste. Conversely, optimized ratios minimize excess water and reduce void spaces, leading to denser, stronger concrete with improved durability and resistance to environmental degradation.

Proper curing reduces porosity by allowing continued hydration, which fills capillary pores with hydration products. This process densifies the cement paste and increases its strength. Careful management of the curing process enables additional hydration reactions, transforming void spaces into stable solid material and creating denser, more durable concrete less susceptible to mechanical and environmental degradation.

Porosity measures void spaces within concrete's structure, which directly affect its mechanical properties and longevity. Higher porosity creates pathways for water infiltration and chemical attack, weakening the material. Lower porosity, achieved through optimized water-cement ratios and proper curing, produces denser concrete with greater resistance to environmental exposure, mechanical stress, and deterioration, resulting in improved behavior of concrete under compressive load.

Gel water, which is trapped within the pores of the cement gel, typically constitutes approximately 28% of the total volume of the cement gel. This water fills minuscule voids known as gel pores and is a critical component of the hydrated cement structure. Understanding gel water content helps engineers predict paste behavior and optimize mix designs for desired strength and durability characteristics.

Total porosity is determined by the ratio of the combined volume of gel pores and capillary pores to the overall volume of the cement paste. Gel pores account for approximately 28% of the cement gel volume, while capillary pores represent about 18.5% of the original cement volume. This combined void volume, relative to total paste volume, defines the paste's overall porosity and influences its strength and permeability.

When cement paste contains more water than needed for hydration, the excess water forms capillary pores, which typically constitute about 18.5% of the original cement volume and are often water-filled. These larger pores remain unfilled by hydration products and create pathways for fluid movement. Excess water increases overall porosity, reduces strength, and compromises durability unless subsequent curing fills these spaces with hydration products.