吹付コンクリート

Shotcrete is mortar or small aggregate concrete rich in cement sprayed through a hose at high velocity onto a surface. The impact of the high-velocity jet compacts the material and enables it to cling to vertical or overhead areas without sagging. This compaction facilitates strong adhesion, allowing shotcrete to be applied to surfaces that would be difficult with conventional concrete placement methods.

In dry mix shotcrete, cement and moist aggregate are combined first, then fed through a hose using compressed air. Water is injected at the nozzle to create wet concrete. In wet mix shotcrete, all ingredients including water are pre-mixed before loading into the delivery system. Compressed air is introduced at the nozzle to increase velocity. Both methods use pneumatic conveyance but differ in when water is added.

The operator's skill in managing the nozzle is crucial to ensuring the quality of the shotcrete. Proper nozzle control affects material compaction, adhesion, and uniform layering. Skilled operators can maintain consistent spray patterns and angles, directly influencing the structural integrity and durability of the final shotcrete application on vertical or overhead surfaces.

Shotcrete is used in constructing tunnel linings, shell and flat roofs, pre-stressed concrete tanks, stabilizing slopes, constructing swimming pools, and restoring deteriorated concrete structures. Its ability to adhere to vertical and overhead surfaces makes it ideal for complex geometries and difficult-to-access areas. The technique's versatility supports both new construction and rehabilitation projects.

Shotcrete is sprayed and layered incrementally to reach a thickness of approximately 4 inches. Each layer is compacted by the high-velocity impact of the jet, which also promotes adhesion between successive layers. This staged layering approach allows operators to build up the desired thickness while maintaining material quality and structural integrity throughout the application process.

At the delivery nozzle, the concrete mixture undergoes final preparation before spraying. In dry mix shotcrete, pressurized water is injected into the dry mixture to transform it into wet concrete. In wet mix shotcrete, compressed air is introduced to increase the velocity at which the pre-mixed concrete is projected. Both processes ensure the material is ready for high-velocity application.

Shotcrete uses mortar or small aggregate concrete rich in cement to ensure strong adhesion and rapid bonding to surfaces. The higher cement content provides the binding strength needed to support the material against gravity on vertical and overhead surfaces. This cement-rich composition, combined with high-velocity impact compaction, creates durable applications suitable for demanding construction environments.