クエット流

Couette flow describes fluid motion between two parallel plates where one plate is stationary and the other moves at constant speed, creating steady, laminar, shear-driven flow. Unlike other flow types, Couette flow is driven purely by plate motion rather than pressure gradients, making it ideal for modeling lubrication in bearings and simplifying the Navier-Stokes equations for analysis.

In Couette flow with zero pressure gradient, the dimensionless parameter becomes zero, resulting in a linear velocity distribution. The fluid velocity increases linearly from zero at the stationary plate to the moving plate's speed, creating a uniform shear rate across the fluid layer. This linear profile emerges directly from the simplified Navier-Stokes equations under these conditions.

Couette flow models fluid behavior in lightly loaded journal bearings, such as those in water pumps, where a thin lubricant layer separates a rotating shaft within a fixed housing. In these bearings, pressure effects are minimal, so flow characteristics closely resemble pure Couette flow. The lubricant's shear stress and flow rate depend on the shaft's rotational speed and the gap width between shaft and housing.

Couette flow assumes steady, laminar, incompressible flow with zero pressure gradient in the flow direction. These conditions allow the complex Navier-Stokes equations to be simplified into a manageable form. The flow is fully developed with no variation across the flow domain, enabling straightforward mathematical analysis of velocity distribution and shear stress.

The dimensionless velocity is expressed as u/U, where u is the local velocity and U is the upper plate's constant velocity. The normalized distance from the stationary plate is y/b, where b is the distance between plates. This dimensionless representation simplifies comparison across different flow scenarios and reveals that velocity increases linearly with normalized distance.

The dimensionless parameter P characterizes variations in Couette flow profiles based on the pressure gradient. When P equals zero, indicating no pressure gradient in the flow direction, the velocity profile becomes purely linear. This parameter determines whether the flow remains simple shear-driven or develops more complex velocity distributions.

In lightly loaded journal bearings modeled as Couette flow, the lubricant layer's shear stress and flow rate depend directly on the shaft's rotational speed and the gap width between shaft and housing. Faster rotation increases shear stress and flow rate, while narrower gaps intensify shear effects. These relationships enable engineers to optimize bearing design for effective lubrication.