Temperature Management Device
Temperature Management Device - Related Videos
06:43
Esophageal Heat Transfer for Patient Temperature Control and Targeted Temperature Management
0 Views •
Cited by 6 •
2017
This study presents a novel method to provide efficient patient temperature control for cooling or warming patients. A single use, triple lumen device is placed into the esophagus, analogous to a standard orogastric tube, and connects to existing heat exchange units to perform automatic patient temperature management.
03:34
Surgical Implantation of Temperature Telemetric Monitoring System in Mouse Model: A Surgical Procedure to Implant Temperature Telemetric Device to Measure Mouse Core Body Temperature
0 Views •
2025
In this video, we describe a surgical procedure to implant a temperature telemetric device in a mouse model to continuously measure its core body temperature.
10:45
A Community-based Stress Management Program: Using Wearable Devices to Assess Whole Body Physiological Responses in Non-laboratory Settings
0 Views •
Cited by 1 •
2018
Stress is an unavoidable and persistent component of life and holistic approaches for its management are being considered. A standardized methodology was created to demonstrate the feasibility of a breath-based stress management protocol that can be used with commercially available portable technology.
08:29
Thermal Measurement Techniques in Analytical Microfluidic Devices
0 Views •
Cited by 6 •
2015
Here, we present three protocols for thermal measurements in microfluidic devices.
09:46
Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5
0 Views •
Cited by 1 •
2016
A protocol for high-temperature and high-pressure gas adsorption measurements on zeolite H-ZSM-5 using an adsorption measurement device based on a langatate crystal microbalance is presented. Prior to the adsorption measurements, the synthesis of zeolite H-ZSM-5 on the langatate crystal microbalance sensor by the steam-assisted crystallization (SAC) method is demonstrated.
FAQs
The device links temperature sensing with controlled heat exchange. A sensor measures core or surface temperature, and the system adjusts heating or cooling output in response. This feedback process helps maintain the intended physiological range rather than relying on a fixed setting. Its value depends on accurate monitoring, because an inappropriate reading can lead to excessive or insufficient temperature correction.
Circulating-temperature blankets and water-circulating pads transfer heat through contact with the patient, whereas warmed-air systems use air to provide heat. Cooling systems remove heat rather than add it. These options differ mainly in how heat reaches or leaves the body, allowing clinicians to select an approach suited to whether the clinical goal is warming, cooling, or maintaining temperature.
Safety depends on continuous assessment because heat transfer can overshoot the intended correction. Excessive warming or cooling may injure tissue, place cardiovascular stress on the patient, or create other complications. Monitoring the patient’s temperature and the device’s response helps clinicians recognize an unsafe trend and modify or stop temperature support before harm develops.
Care begins by identifying whether the immediate goal is to prevent or treat hypothermia or fever, or to support targeted temperature management. Clinicians then use an appropriate modality, apply temperature monitoring, and observe the patient while the system transfers heat. Ongoing readings guide adjustment of the device’s output and help maintain physiological stability during the clinical episode.
These systems are relevant during illness, surgery, recovery, critical care, and perioperative care when temperature disturbances could challenge physiological stability. Use may focus on preventing or treating hypothermia or fever, or on supporting a deliberate temperature target. The same broad technology therefore serves both routine temperature support and more intensive temperature management.
Routine support may focus on preventing or treating an unwanted temperature change, such as hypothermia or fever. Targeted temperature management instead refers to using controlled temperature regulation as part of critical care to support a defined temperature goal. Both require sensor-based monitoring, but the intended objective and care context distinguish these applications.