Name: square-thread screw mechanics and friction
Uploaded: 2023-09-22T11:49:29.000Z
Duration: 1 min 17 s
Channel: JoVE

나사의 대부분은 나선형 능선이 특징이며 일반적으로 패스너로 사용됩니다. 사각형 나사산 나사는 부품 간에 동력이나 움직임을 전달하기 위해 기계에 자주 사용됩니다.
하중을 운반하는 사각형 나사산 나사가 있는 잭을 생각해 보십시오. 핸들에 힘이 가해지면 나사가 회전하고 하중이 증가합니다.
나사는 경사진 사각형 융기가 감싸 인 원통형 샤프트로 간주 될 수 있습니다.
인접한 두 나사산의 마루 사이의 거리는 피치이며 나사가 한 회전으로 전진하는 거리를 리드라고 합니다.
실이 한 바퀴 풀리면 각도가 있는 경사로와 비슷합니다. 나사산의 경사각을 리드 각도라고 하며 평균 나사산 반경과 리드로 표현됩니다.
표면 사이의 마찰력은 접촉 면적과 무관하기 때문에 나사는 잭의 나사산 위에 있는 블록으로 표시됩니다.
반력과 나사산에 수직인 각도 사이의 각도는 마찰 각도입니다.

<ol>
	<li>히벨러, R.C. (2016). 엔지니어링 역학: 정적. 14판, 뉴저지: 피어슨. 432쪽.</li>
	<li>Meriam, J.L., Kraige, L.G. 및 Bolten, J.N.(2016). Engineering Mechanics: Statics and Dynamics(정역학 및 동역학). 여덟 번째 판, 싱가포르 : John Wiley & Sons. 354-355쪽.</li>
	<li>Beer, F.P., Johnston, E.R., Mazurek, D.F., Cornwell, P.J. 및 Self, B.P. (2016). 엔지니어를 위한 벡터 역학. 제 11 판, 뉴욕 : McGraw-Hill Education. 450-451쪽.</li>
</ol>

나사의 마찰력

Frictional Forces on Screws

나사는 원통형 축을 감싸는 나사산으로 알려진 나선형 능선이 특징입니다. 나사는 일반적으로 물체를 고정하거나 기계에서 동력과 움직임을 전달하는 고정 장치로 사용됩니다. 동력을 전달하는 데 특히 유용한 나사 유형 중 하나는 정사각형 나사입니다.

사각 나사산을 가진 잭은 손잡이에 힘을 주어 무거운 짐을 들어올리는 데 사용되는 기계 장치입니다. 힘이 가해지면 나사산이 회전하여 하중을 높입니다. 나사산은 경사진 사각형 능선이나 나사산이 감겨 있는 원통형 축이라고 할 수 있습니다. 이 나사산에는 그 기능을 정의하는 특정한 특성이 있습니다.

나사에서 인접한 두 개의 나사산 사이의 거리를 피치라고 합니다. 이 측정은 나사산들이 얼마나 가깝게 뭉쳐져 있는지를 결정하기 때문에 매우 중요합니다. 나사의 또 다른 본질적인 특징은 나사가 한 바퀴를 돌 때 전진하는 거리를 나타내는 리드입니다.

나사산이 한 바퀴 회전하여 풀리면 특정 각도의 경사로와 유사합니다. 이 경사각을 납각이라고 하며, 평균 나사산 반지름(나사의 중심에서 나사산의 중심선까지의 평균 거리)과 납으로 표현할 수 있습니다. 납각은 나사산의 효율성과 나사산을 돌리는 데 필요한 힘의 양에 영향을 미치기 때문에 중요한 매개변수입니다.

사각 나사산의 역학을 이해하려면 나사산에 작용하는 마찰력을 고려하는 것이 도움이 됩니다. 두 표면 사이의 마찰력은 접촉 면적과 무관하기 때문에 나사산은 잭의 나사산 위에 있는 블록으로 표현될 수 있습니다. 반력(나사가 블록에 작용하는 힘)과 나사산의 수직선(나사 표면에 수직인 방향) 사이의 각도를 마찰각이라고 합니다. 이 각도는 접촉하는 물질과 그들 사이에 사용되는 윤활에 의해 결정됩니다.

사각나사의 효율성과 기능성은 나사와 나사가 전달하는 하중 사이의 마찰력이 중요한 역할을 합니다. 나사를 돌려 하중을 높이려면 마찰력을 극복해야 합니다. 그러나 이러한 힘은 안정성도 제공하여 손잡이에서 힘을 빼도 나사가 돌아가지 않고 하중이 떨어지는 것을 방지합니다. 이 자체 잠금 기능은 나사가 지속적인 입력 힘 없이 하중을 제자리에 고정해야 하는 응용 분야에서 특히 유용합니다.

높은 효율성과 자체 잠금 기능 때문에 사각 나사는 부품 간에 동력이나 움직임을 전달하기 위해 기계에 자주 사용됩니다. 이러한 용도의 예로는 잭, 클램프, 비스 및 다양한 프레스가 있습니다. 이러한 나사는 무거운 하중을 견디고 부드럽고 제어된 움직임을 제공하도록 설계되었습니다.

나사는 원통형 샤프트를 감싼 나사산으로 알려진 나선형 융기가 특징입니다. 그들은 일반적으로 물체를 잡는 패스너로 사용됩니다 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Friction

마찰

KEY TERMS AND CONCEPTS

주요 용어 및 개념

square-thread screw mechanics and friction

Square-threaded screws use a helical thread to turn force into lifting motion. They are common fasteners, but they are also useful for transmitting power and motion in machines. A jack with a square-threaded screw lifts heavy loads when force is applied at the handle and the screw turns.

A screw can be viewed as a cylindrical shaft with an inclined square ridge wrapped around it. The distance between two neighboring threads is called the pitch. The lead is the distance the screw advances in one full revolution, and the lead angle is the angle of that advance when the thread is unwrapped into a ramp.

The lead angle depends on the mean thread radius, which is the average distance from the center of the screw to the centerline of the thread, and on the lead itself. This angle matters because it affects screw efficiency and the force needed to turn the screw. To study a square-threaded screw, the frictional forces acting on it must also be considered.

Because friction does not depend on contact area, the screw can be modeled as a block moving over the thread of the jack. The angle between the reaction force from the thread and the normal to the thread surface is called the angle of friction. It depends on the materials in contact and on any lubrication used between them.

Friction between the screw and the load must be overcome to raise the load. At the same time, that same friction helps keep the screw from turning back when the handle force is removed. This self-locking feature is useful when the load must stay in place without continuous force.

Square-threaded screws are valued for high efficiency and self-locking behavior. They are used in jacks, clamps, vises, and presses. These machines rely on the screw to hold heavy loads and produce smooth, controlled motion.

Square-Thread Screw Mechanics and Friction

square-thread-screw-mechanics-and-friction

dry friction

Dry Friction in Crates and Everyday Motion

Dry friction appears when two solid surfaces touch and try to move past each other. Students can see it when they walk, slide a box across a table, or rub their hands together. Even though it is common, the forces behind it are not easy to see. A simple crate on a rough horizontal floor helps explain the idea. When an external force pushes the crate sideways, two main forces act on it. The normal force acts perpendicular to the surface and helps balance the crate’s weight, while the frictional...

static friction

Static Friction at the Point of Slip

Static friction is the force that keeps two surfaces from starting to slide past each other. It acts when there is a tendency for motion, but not yet actual slipping. This force helps explain everyday actions like walking on the ground and driving a car. A towing example shows how static friction changes as force is applied. A truck pulls a car with a rope, and the car stays still at first. The car is in static equilibrium, which means the forces on it are balanced. Gravity and the normal...

kinetic friction

Sliding Friction Between Moving Surfaces

Kinetic friction is the sliding friction that acts when two surfaces move against each other. It opposes relative motion and acts parallel to the contact surface, in the opposite direction of travel. In the truck and car example, the car first stays still because static friction holds it in place. When the truck’s force becomes greater than the limiting static frictional force, the friction at the contact surface drops to a lower value. The car then begins to slide, and its speed increases. At...

characteristics of dry friction

Static and Kinetic Dry Friction

Dry friction is the resistance between two solid surfaces that move against each other without lubrication or any fluid. A common example is a gardener pushing a wheelbarrow across the ground. The wheel and the ground create dry friction that slows the motion. Before the wheelbarrow starts to move, static friction acts at the contact surface. Static friction is the force that opposes motion before slipping begins, and it helps keep the wheelbarrow stable. It is present only when there is no...

types of friction problems

Dry Friction in Crate, Ladder, and Frame Problems

Dry friction problems often focus on crates, ladders, and frames that are close to slipping. Dry friction is the force that resists relative motion, or the tendency for motion, between two surfaces in contact. In many physics and engineering problems, this force helps keep an object still or defines the point where motion is about to begin. One common case has no clear impending motion. A force may be applied to a crate, but the crate stays at rest. The friction force between the floor and the...

friction: problem solving

Friction on a Banked Road

Friction on a banked road affects whether a bus stays steady while it moves at constant speed. In this problem, a bus with a mass of three megagrams travels on a sloped road. The coefficient of static friction between the tires and the road is 0.5. The goal is to find the maximum bank angle where the bus will not slip or tip. To solve the motion part, the forces on the bus must be shown first. These include gravity, the normal force, and friction. The normal force is the push from the road,...

wedges

Wedges and Self-Locking Stability

A wedge is a simple machine that can lift, support, and split heavy objects. It can also change the height of structural or mechanical parts. Because it amplifies force, a wedge makes it easier to move or hold large loads with less effort. One example is lifting a heavy slab. In that case, the wedge turns the applied force into a much larger force that acts almost perpendicular to the original push. That force change helps raise the load without requiring a large input force. To analyze wedge...

frictional forces on screws

Square-threaded screws use a helical thread to turn force into lifting motion. They are common fasteners, but they are also useful for transmitting power and motion in machines. A jack with a square-threaded screw lifts heavy loads when force is applied at the handle and the screw turns. A screw can be viewed as a cylindrical shaft with an inclined square ridge wrapped around it. The distance between two neighboring threads is called the pitch. The lead is the distance the screw advances in...

upward impending motion

Screw Jack Force and Friction Analysis

A square-threaded screw jack lifts heavy loads by turning handle force into a twisting moment. Its upward motion depends on overcoming static friction between the screw threads and the jack. To study this motion, the thread can be treated as if it were a block on the groove of the jack after the thread is completely unraveled. A free-body diagram helps show the forces acting on this simplified system. The force at the handle creates a horizontal force that pushes the movable thread up the...

self-locking screw

Screw Jack Self-Locking Behavior

A square-threaded screw jack can hold a heavy load because of its self-locking behavior. This feature makes the device more reliable when it is used to lift large weights or apply a strong force. If the screw keeps its position after the turning moment is removed, the jack is self-locking. Self-locking happens because friction changes the way the forces act on the thread. The friction force reverses direction, and the reaction force moves to the other side of the thread’s normal. In this case,...

screw: problem solving

Screw Torque and Self-Locking

Screw torque and self-locking are analyzed by looking at a threaded screw shaft and a plate gear. The shaft has a mean radius and a lead. The plate gear also has a mean radius. The coefficient of static friction between the screw and the gear is part of the setup. The first step is to find the static friction angle, φ. This angle is defined by the coefficient of static friction. Next, the lead angle is calculated from the lead and the mean radius of the shaft. It gives the screw geometry...

frictional forces on flat belts

Flat Belt Tension and Friction

Flat belt tension and friction control how power moves from one pulley to another. Flat belts are used in many industrial systems to transmit power between pulleys. As the belt wraps around the pulleys, the tension changes because of friction between the belt and the pulley surface. When a pulley turns counterclockwise, the belt side moving away from the pulley has the higher tension, called T2. The side moving toward the pulley has the lower tension, called T1. To estimate these tensions, the...

flat belts: problem solving

Flat Belt Forces and Pulley Moment

Flat belts transmit power from one pulley to another, and the forces on the belt help determine the moment on a pulley. In this example, a belt wraps around pulleys A and B, with radii of 30 cm and 10 cm. The belt meets the pulleys at a 20 degree angle from the horizontal, which sets up the force balance in the system. As pulley B rotates clockwise, it drives pulley A. That motion creates tension T2 on one side of the belt and tension T1 on the other side. The belt-to-surface contact angle, β,...

pivot bearings

Axial Load Support in Pivot Bearings

Pivot bearings support axial loads on a rotating shaft. A bearing helps two parts move relative to each other while reducing friction and wear. In this design, the pivot is placed at the end of the shaft to carry the axial thrust. The pivot surface can be flat, conical, or truncated, depending on the application. In a flat pivot bearing, the axial load is spread over the bearing area. The pressure is uniform and can be found by dividing the load by the area. To study the forces more closely,...

collar bearings

Friction Torque in Collar Bearings

Collar bearings support axial loads on rotating shafts, and their friction helps determine the torque needed to start motion. They are used in many machines and may have a single collar or multiple collars, depending on the application and load needs. For a single collar bearing under an axial load, the contact area is the ring-shaped region between the external radius and the internal radius of the collar. If the bearing is assumed to support the load evenly, the uniform normal pressure is...

journal bearings

Friction Moment in Journal Bearings

Journal bearings support rotating shafts and axles while helping keep them stable. They are used in machines such as engines, turbines, and pumps. Their job is to reduce friction, wear, and vibration. A journal bearing works by keeping a thin film of lubricant between the bearing surface and the rotating shaft. This film limits direct contact and lowers frictional force. The video uses a rope winch with dry or only partly lubricated journal bearings to show the idea. As the spool turns...

bearings: problem solving

Double-Collar Bearing Torque Calculations

Double-collar bearing torque calculations show how friction and axial force affect bearing performance. Engineers use these calculations to test whether the bearing can handle the forces and moments it experiences during operation. This helps them choose and design bearings for specific applications and setups. For a double-collar bearing with set dimensions and an axial force applied, the maximum frictional moment can be found with a standard expression. The equation is rearranged, and the...

rolling resistance

Tire Deformation and Rolling Resistance

Tire deformation and rolling resistance explain why a rolling wheel still needs a driving force. When a solid cylinder or tire rolls on a rigid surface, the normal force is perpendicular to the surface at the contact point. But real materials are not perfectly rigid, so the surface pushes back with a spread of normal pressures instead of one single force. A hard cylinder on a softer surface compresses the material under it. As the cylinder moves forward, the material in front of the contact...

rolling resistance: problem solving

Lawn Roller Force Calculation

Rolling resistance is the force that makes a rolling object harder to move across a surface. It is also called rolling friction. It comes from deformation in the object and the surface that touch each other. Internal friction, hysteresis, and other energy losses in the materials also play a role. Because of this force, extra energy is needed to keep a wheel, tire, or ball moving. The video applies this idea to a lawn roller. The roller has a mass of 100 kg, a radius of 25 cm, and a coefficient...

key terms and concepts

Learn how square-threaded screws lift heavy loads, use pitch and lead, and stay self-locking through friction in jacks, clamps, vises, and presses.

Square-Thread Screw Mechanics and Friction | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Square-Thread Screw Mechanics and Friction

Description

Transcript