Name: flat belt tension and friction
Uploaded: 2023-09-22T11:49:29.000Z
Duration: 1 min 28 s
Channel: JoVE

도르래 세트를 감싼 평평한 벨트를 고려하여 구동 풀리 끝에서 벨트 장력을 경험하십시오.
시계 반대 방향 풀리 동작의 경우 T2 의 크기는 벨트와 풀리 표면 사이의 마찰로 인해 T1 보다 큽니다.
벨트와 표면 접촉의 총 각도와 마찰 계수를 알면 장력을 추정할 수 있습니다.
벨트의 차동 요소 AB의 자유물체 다이어그램이 그려집니다.
임박한 움직임을 가정하면 마찰력은 벨트의 슬라이딩 운동에 반대하여 B 지점에서 작용하는 벨트 장력의 크기가 dT만큼 증가합니다.
수평 및 수직 힘 평형을 적용하고 코사인 및 사인 근사치를 사용하여 두 개의 힘 평형 방정식을 얻습니다.
1차 미분과 비교한 두 미분의 곱은 수직 평형 방정식에서 무시되는 반면 수평 평형 방정식은 더 단순화됩니다.
평형 방정식을 결합하고 해당 한계 사이를 적분하면 벨트 장력을 상호 연관시키는 표현식이 제공됩니다.
이 방정식은 곡선 접촉 표면을 통과하는 플랫 벨트에 적용됩니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 439쪽 \u2012 440쪽.</li>
	<li>메리암, J.L.; Kraige, L.G. 및 Bolton, J.N. (2020). 엔지니어링 역학 \u2012 정역학. 뉴저지 호보켄: 존 와일리. 373쪽.</li>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 셀프, BP (2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 463쪽</li>
</ol>

평벨트에 작용하는 마찰력

Frictional Forces on Flat Belts

평벨트는 하나의 도르래에서 다른 도르래로 동력을 전달하기 위한 다양한 산업 응용 분야에서 일반적으로 사용됩니다. 평벨트가 도르래 세트에 감길 때 벨트와 도르래 표면 사이의 마찰로 인해 구동 도르래 단부에서 다른 장력을 경험합니다. 도르래가 반시계 방향으로 움직일 때 벨트가 멀어지는 도르래 반대쪽의 장력 T2은 벨트가 이동하는 쪽의 장력 T1보다 높습니다.

평평한 벨트의 장력을 추정하려면 벨트와 표면의 접촉각과 표면 사이의 마찰계수를 알아야 합니다. 벨트의 미분 요소 AB의 자유 물체 도표는 임박한 움직임을 가정하여 그릴 수 있습니다.

<img alt="Figure 1" src="/files/ftp_upload/14322/14322_PT_Fig_1v2.svg" style="text-align: center; height: 350px;">

마찰력은 벨트의 미끄러짐 운동을 반대하므로 지점 B에서 작용하는 벨트 장력의 크기가 dT만큼 증가합니다. 이 차동 장력은 벨트를 따라 서로 다른 지점의 장력을 연관시키는 데 사용될 수 있습니다.
벨트 장력 사이의 관계를 결정하기 위해 코사인 및 사인 근사치와 함께 수평 및 수직 힘 평형 방정식이 사용됩니다.
<img alt="Equation 1" src="/files/ftp_upload/14322/14322_PT_Equation_1v2.svg" style="text-align: center; height: 30px;" />
<img alt="Equation 2" src="/files/ftp_upload/14322/14322_PT_Equation_2v2.svg" style="text-align: center; height: 30px;" />
이 방정식들은 미분 요소 AB에 작용하는 수평 및 수직 방향의 힘을 고려합니다. 1차 미분과 비교한 두 미분의 곱은 수직 평형 방정식에서는 무시되고 수평 평형 방정식은 더 단순화됩니다. 평형 방정식은 해당 한계 사이에 결합되고 통합됩니다.
<img alt="Equation 3" src="/files/ftp_upload/14322/14322_PT_Equation_3v2.svg" style="text-align: center; height: 45px;" />
결과는 벨트 장력과 상관관계가 있는 식을 제공합니다.
<img alt="Equation 4" src="/files/ftp_upload/14322/14322_PT_Equation_4v2.svg" style="text-align: center; height: 15px;" />
이 방정식은 임의의 곡선 접촉면 위를 지나는 평평한 벨트에 적용됩니다.
평평한 벨트에 작용하는 마찰력은 벨트 구동 시스템의 성능과 효율을 결정하는 데 매우 중요합니다. 벨트를 과도하게 장력을 가하면 조기 마모가 발생하여 효율이 저하되는 반면, 장력이 부족하면 미끄러짐이 발생하여 동력 전달이 저하될 수 있습니다.

플랫 벨트는 한 풀리에서 다른 풀리로 동력을 전달하기 위해 다양한 산업 응용 분야에서 일반적으로 사용됩니다. 평벨트가 감싸져 있을 때 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Friction

마찰

KEY TERMS AND CONCEPTS

주요 용어 및 개념

flat belt tension and friction

Flat belt tension and friction control how power moves from one pulley to another. Flat belts are used in many industrial systems to transmit power between pulleys. As the belt wraps around the pulleys, the tension changes because of friction between the belt and the pulley surface.

When a pulley turns counterclockwise, the belt side moving away from the pulley has the higher tension, called T2. The side moving toward the pulley has the lower tension, called T1. To estimate these tensions, the total angle of contact and the coefficient of friction between the surfaces must be known.

The belt can be analyzed with a free-body diagram of a small belt element, AB. This analysis assumes impending motion, which means the belt is close to slipping. Friction acts against the sliding motion, so the tension at point B increases by a small amount, dT.

The tension relationship is found using horizontal and vertical force equilibrium. Cosine and sine approximations help simplify the force equations for the small belt element. In the vertical equation, the product of two differentials is neglected, and the horizontal equation is simplified further. The equations are then combined and integrated between the proper limits to obtain the belt-tension expression.

This result applies to flat belts that pass over curved contacting surfaces. Frictional forces are important because they affect the performance and efficiency of the belt-driven system. If the belt is too tight, it can wear out early and reduce efficiency. If it is too loose, it can slip and reduce power transmission. Proper tension is usually set by changing the distance between the pulleys or by using a tensioning device.

Flat Belt Tension and Friction

dry friction

Dry Friction in Crates and Everyday Motion

Dry friction appears when two solid surfaces touch and try to move past each other. Students can see it when they walk, slide a box across a table, or rub their hands together. Even though it is common, the forces behind it are not easy to see. A simple crate on a rough horizontal floor helps explain the idea. When an external force pushes the crate sideways, two main forces act on it. The normal force acts perpendicular to the surface and helps balance the crate’s weight, while the frictional...

static friction

Static Friction at the Point of Slip

Static friction is the force that keeps two surfaces from starting to slide past each other. It acts when there is a tendency for motion, but not yet actual slipping. This force helps explain everyday actions like walking on the ground and driving a car. A towing example shows how static friction changes as force is applied. A truck pulls a car with a rope, and the car stays still at first. The car is in static equilibrium, which means the forces on it are balanced. Gravity and the normal...

kinetic friction

Sliding Friction Between Moving Surfaces

Kinetic friction is the sliding friction that acts when two surfaces move against each other. It opposes relative motion and acts parallel to the contact surface, in the opposite direction of travel. In the truck and car example, the car first stays still because static friction holds it in place. When the truck’s force becomes greater than the limiting static frictional force, the friction at the contact surface drops to a lower value. The car then begins to slide, and its speed increases. At...

characteristics of dry friction

Static and Kinetic Dry Friction

Dry friction is the resistance between two solid surfaces that move against each other without lubrication or any fluid. A common example is a gardener pushing a wheelbarrow across the ground. The wheel and the ground create dry friction that slows the motion. Before the wheelbarrow starts to move, static friction acts at the contact surface. Static friction is the force that opposes motion before slipping begins, and it helps keep the wheelbarrow stable. It is present only when there is no...

types of friction problems

Dry Friction in Crate, Ladder, and Frame Problems

Dry friction problems often focus on crates, ladders, and frames that are close to slipping. Dry friction is the force that resists relative motion, or the tendency for motion, between two surfaces in contact. In many physics and engineering problems, this force helps keep an object still or defines the point where motion is about to begin. One common case has no clear impending motion. A force may be applied to a crate, but the crate stays at rest. The friction force between the floor and the...

friction: problem solving

Friction on a Banked Road

Friction on a banked road affects whether a bus stays steady while it moves at constant speed. In this problem, a bus with a mass of three megagrams travels on a sloped road. The coefficient of static friction between the tires and the road is 0.5. The goal is to find the maximum bank angle where the bus will not slip or tip. To solve the motion part, the forces on the bus must be shown first. These include gravity, the normal force, and friction. The normal force is the push from the road,...

wedges

Wedges and Self-Locking Stability

A wedge is a simple machine that can lift, support, and split heavy objects. It can also change the height of structural or mechanical parts. Because it amplifies force, a wedge makes it easier to move or hold large loads with less effort. One example is lifting a heavy slab. In that case, the wedge turns the applied force into a much larger force that acts almost perpendicular to the original push. That force change helps raise the load without requiring a large input force. To analyze wedge...

frictional forces on screws

Square-Thread Screw Mechanics and Friction

Square-threaded screws use a helical thread to turn force into lifting motion. They are common fasteners, but they are also useful for transmitting power and motion in machines. A jack with a square-threaded screw lifts heavy loads when force is applied at the handle and the screw turns. A screw can be viewed as a cylindrical shaft with an inclined square ridge wrapped around it. The distance between two neighboring threads is called the pitch. The lead is the distance the screw advances in...

upward impending motion

Screw Jack Force and Friction Analysis

A square-threaded screw jack lifts heavy loads by turning handle force into a twisting moment. Its upward motion depends on overcoming static friction between the screw threads and the jack. To study this motion, the thread can be treated as if it were a block on the groove of the jack after the thread is completely unraveled. A free-body diagram helps show the forces acting on this simplified system. The force at the handle creates a horizontal force that pushes the movable thread up the...

self-locking screw

Screw Jack Self-Locking Behavior

A square-threaded screw jack can hold a heavy load because of its self-locking behavior. This feature makes the device more reliable when it is used to lift large weights or apply a strong force. If the screw keeps its position after the turning moment is removed, the jack is self-locking. Self-locking happens because friction changes the way the forces act on the thread. The friction force reverses direction, and the reaction force moves to the other side of the thread’s normal. In this case,...

screw: problem solving

Screw Torque and Self-Locking

Screw torque and self-locking are analyzed by looking at a threaded screw shaft and a plate gear. The shaft has a mean radius and a lead. The plate gear also has a mean radius. The coefficient of static friction between the screw and the gear is part of the setup. The first step is to find the static friction angle, φ. This angle is defined by the coefficient of static friction. Next, the lead angle is calculated from the lead and the mean radius of the shaft. It gives the screw geometry...

frictional forces on flat belts

Flat belt tension and friction control how power moves from one pulley to another. Flat belts are used in many industrial systems to transmit power between pulleys. As the belt wraps around the pulleys, the tension changes because of friction between the belt and the pulley surface. When a pulley turns counterclockwise, the belt side moving away from the pulley has the higher tension, called T2. The side moving toward the pulley has the lower tension, called T1. To estimate these tensions, the...

flat belts: problem solving

Flat Belt Forces and Pulley Moment

Flat belts transmit power from one pulley to another, and the forces on the belt help determine the moment on a pulley. In this example, a belt wraps around pulleys A and B, with radii of 30 cm and 10 cm. The belt meets the pulleys at a 20 degree angle from the horizontal, which sets up the force balance in the system. As pulley B rotates clockwise, it drives pulley A. That motion creates tension T2 on one side of the belt and tension T1 on the other side. The belt-to-surface contact angle, β,...

pivot bearings

Axial Load Support in Pivot Bearings

Pivot bearings support axial loads on a rotating shaft. A bearing helps two parts move relative to each other while reducing friction and wear. In this design, the pivot is placed at the end of the shaft to carry the axial thrust. The pivot surface can be flat, conical, or truncated, depending on the application. In a flat pivot bearing, the axial load is spread over the bearing area. The pressure is uniform and can be found by dividing the load by the area. To study the forces more closely,...

collar bearings

Friction Torque in Collar Bearings

Collar bearings support axial loads on rotating shafts, and their friction helps determine the torque needed to start motion. They are used in many machines and may have a single collar or multiple collars, depending on the application and load needs. For a single collar bearing under an axial load, the contact area is the ring-shaped region between the external radius and the internal radius of the collar. If the bearing is assumed to support the load evenly, the uniform normal pressure is...

journal bearings

Friction Moment in Journal Bearings

Journal bearings support rotating shafts and axles while helping keep them stable. They are used in machines such as engines, turbines, and pumps. Their job is to reduce friction, wear, and vibration. A journal bearing works by keeping a thin film of lubricant between the bearing surface and the rotating shaft. This film limits direct contact and lowers frictional force. The video uses a rope winch with dry or only partly lubricated journal bearings to show the idea. As the spool turns...

bearings: problem solving

Double-Collar Bearing Torque Calculations

Double-collar bearing torque calculations show how friction and axial force affect bearing performance. Engineers use these calculations to test whether the bearing can handle the forces and moments it experiences during operation. This helps them choose and design bearings for specific applications and setups. For a double-collar bearing with set dimensions and an axial force applied, the maximum frictional moment can be found with a standard expression. The equation is rearranged, and the...

rolling resistance

Tire Deformation and Rolling Resistance

Tire deformation and rolling resistance explain why a rolling wheel still needs a driving force. When a solid cylinder or tire rolls on a rigid surface, the normal force is perpendicular to the surface at the contact point. But real materials are not perfectly rigid, so the surface pushes back with a spread of normal pressures instead of one single force. A hard cylinder on a softer surface compresses the material under it. As the cylinder moves forward, the material in front of the contact...

rolling resistance: problem solving

Lawn Roller Force Calculation

Rolling resistance is the force that makes a rolling object harder to move across a surface. It is also called rolling friction. It comes from deformation in the object and the surface that touch each other. Internal friction, hysteresis, and other energy losses in the materials also play a role. Because of this force, extra energy is needed to keep a wheel, tire, or ball moving. The video applies this idea to a lawn roller. The roller has a mass of 100 kg, a radius of 25 cm, and a coefficient...

key terms and concepts

Learn how friction changes tension in a flat belt, why angle of contact matters, and how proper belt tension helps prevent wear and slippage.

Flat Belt Tension and Friction | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Flat Belt Tension and Friction

Description

Transcript