Name: friction torque in collar bearings
Uploaded: 2023-09-22T11:49:30.000Z
Duration: 1 min 23 s
Channel: JoVE

칼라 베어링은 회전 샤프트의 축 방향 하중을 지지하기 위해 기계에 사용되는 베어링 유형이며 단일 또는 다중 칼라를 가질 수 있습니다.
축 방향 하중을 받는 단일 칼라 베어링을 고려하십시오. 칼라의 외부 반경과 내부 반경 사이의 영역은 총 베어링 접촉 면적입니다.
베어링에 대한 지지조차도 가정하면 균일한 수직 압력은 베어링 영역에 대한 힘의 비율로 표현될 수 있습니다.
베어링의 극소 면적 요소를 고려하십시오. 차동 영역에 작용하는 힘은 마찰 계수, 압력 및 차동 영역의 곱으로 표현될 수 있습니다.
샤프트의 임박한 회전을 유발하는 데 필요한 모멘트는 회전축에 대한 모멘트 평형 방정식에서 결정됩니다.
다음으로, 적분을 사용하여 모든 마찰력을 극복하는 데 필요한 적용된 모멘트를 결정합니다.
마지막으로, 차력과 차등 면적의 값을 대체하고 전체 베어링 면적에 대한 방정식을 적분함으로써 샤프트의 모멘트를 추정할 수 있습니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 피 447-448.</li>
</ol>

칼라 베어링

칼라 베어링은 회전축의 축방향 하중을 지지하도록 설계된 다양한 기계에서 필수적입니다. 구체적인 용도와 요구사항에 따라 단일 또는 다중 칼라로 찾을 수 있습니다.

<img alt="Figure 1" src="/files/ftp_upload/14325/14325_Figure_1v3.svg" style="text-align: center; height: 300px;">

축방향 하중을 받는 단일 칼라 베어링을 고려해 보겠습니다.. 전체 베어링 접촉 면적은 칼라의 외부 반경과 내부 반경 사이의 영역입니다. 베어링이 고른 지지를 제공한다고 가정할 때, 균일한 상압은 칼라에 가해지는 힘을 전체 베어링 접촉 면적으로 나누어 계산할 수 있습니다. 이 값은 베어링 표면에 걸친 평균 압력 분포를 나타냅니다.

칼라 베어링에 작용하는 힘을 더 자세히 분석하려면 베어링 표면의 작은 무한소 면적 요소를 고려해야 합니다. 이 무한소 면적에 작용하는 힘은 마찰 계수, 압력 및 미분 면적의 곱입니다. 이 변수들 사이의 관계를 이해하는 것은 축이 회전하는 데 필요한 모멘트를 계산하는 데 매우 중요합니다.

축의 임박한 회전은 회전축에 대한 모멘트 평형방정식을 분석함으로써 결정됩니다. 이 방정식은 칼라 베어링에 의해 발생하는 마찰력을 포함하여 축에 작용하는 모든 힘과 모멘트를 고려합니다.

<img alt="Equation 1" src="/files/ftp_upload/14325/14325_Equation_1v2.svg" style="text-align: center; height: 39px;" />

식을 적분하면 이 모든 마찰력을 극복하는 데 필요한 인가 모멘트를 결정할 수 있으며, 이로써 축의 회전이 시작됩니다. 마지막으로 축의 모멘트를 추정하기 위해 미분력과 면적값을 적분식에 대입합니다.

<img alt="Equation 2" src="/files/ftp_upload/14325/14325_Equation_2v2.svg" style="text-align: center; height: 55px;" />

이 식을 전체 베어링 영역에 통합하면 칼라 베어링에 작용하는 힘과 모멘트 및 샤프트가 회전하는 데 필요한 모멘트를 포괄적으로 이해할 수 있습니다.

<img alt="Equation 3" src="/files/ftp_upload/14325/14325_Equation_3v2.svg" style="text-align: center; height: 39px;" />

칼라 베어링은 회전축의 축 방향 하중을 지지하도록 설계된 다양한 기계에 필수적입니다. 특정 응용 프로그램에 따라 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Friction

마찰

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Collar Bearings

friction torque in collar bearings

Collar bearings support axial loads on rotating shafts, and their friction helps determine the torque needed to start motion. They are used in many machines and may have a single collar or multiple collars, depending on the application and load needs.

For a single collar bearing under an axial load, the contact area is the ring-shaped region between the external radius and the internal radius of the collar. If the bearing is assumed to support the load evenly, the uniform normal pressure is found by dividing the applied force by this total bearing contact area. This gives the average pressure across the bearing surface.

To study the forces more closely, a small infinitesimal area element is considered on the collar surface. The force on that tiny area equals the friction coefficient times the pressure times the differential area. Using this relationship is important for finding the moment required to rotate the shaft.

The impending rotation of the shaft is found by writing the moment equilibrium equation about the rotational axis. This equation includes the forces and moments on the shaft, along with the frictional forces from the collar bearing. When the equation is integrated over the full bearing area, the applied moment needed to overcome friction and begin rotation can be determined.

Friction Torque in Collar Bearings

dry friction

Dry Friction in Crates and Everyday Motion

Dry friction appears when two solid surfaces touch and try to move past each other. Students can see it when they walk, slide a box across a table, or rub their hands together. Even though it is common, the forces behind it are not easy to see. A simple crate on a rough horizontal floor helps explain the idea. When an external force pushes the crate sideways, two main forces act on it. The normal force acts perpendicular to the surface and helps balance the crate’s weight, while the frictional...

static friction

Static Friction at the Point of Slip

Static friction is the force that keeps two surfaces from starting to slide past each other. It acts when there is a tendency for motion, but not yet actual slipping. This force helps explain everyday actions like walking on the ground and driving a car. A towing example shows how static friction changes as force is applied. A truck pulls a car with a rope, and the car stays still at first. The car is in static equilibrium, which means the forces on it are balanced. Gravity and the normal...

kinetic friction

Sliding Friction Between Moving Surfaces

Kinetic friction is the sliding friction that acts when two surfaces move against each other. It opposes relative motion and acts parallel to the contact surface, in the opposite direction of travel. In the truck and car example, the car first stays still because static friction holds it in place. When the truck’s force becomes greater than the limiting static frictional force, the friction at the contact surface drops to a lower value. The car then begins to slide, and its speed increases. At...

characteristics of dry friction

Static and Kinetic Dry Friction

Dry friction is the resistance between two solid surfaces that move against each other without lubrication or any fluid. A common example is a gardener pushing a wheelbarrow across the ground. The wheel and the ground create dry friction that slows the motion. Before the wheelbarrow starts to move, static friction acts at the contact surface. Static friction is the force that opposes motion before slipping begins, and it helps keep the wheelbarrow stable. It is present only when there is no...

types of friction problems

Dry Friction in Crate, Ladder, and Frame Problems

Dry friction problems often focus on crates, ladders, and frames that are close to slipping. Dry friction is the force that resists relative motion, or the tendency for motion, between two surfaces in contact. In many physics and engineering problems, this force helps keep an object still or defines the point where motion is about to begin. One common case has no clear impending motion. A force may be applied to a crate, but the crate stays at rest. The friction force between the floor and the...

friction: problem solving

Friction on a Banked Road

Friction on a banked road affects whether a bus stays steady while it moves at constant speed. In this problem, a bus with a mass of three megagrams travels on a sloped road. The coefficient of static friction between the tires and the road is 0.5. The goal is to find the maximum bank angle where the bus will not slip or tip. To solve the motion part, the forces on the bus must be shown first. These include gravity, the normal force, and friction. The normal force is the push from the road,...

wedges

Wedges and Self-Locking Stability

A wedge is a simple machine that can lift, support, and split heavy objects. It can also change the height of structural or mechanical parts. Because it amplifies force, a wedge makes it easier to move or hold large loads with less effort. One example is lifting a heavy slab. In that case, the wedge turns the applied force into a much larger force that acts almost perpendicular to the original push. That force change helps raise the load without requiring a large input force. To analyze wedge...

frictional forces on screws

Square-Thread Screw Mechanics and Friction

Square-threaded screws use a helical thread to turn force into lifting motion. They are common fasteners, but they are also useful for transmitting power and motion in machines. A jack with a square-threaded screw lifts heavy loads when force is applied at the handle and the screw turns. A screw can be viewed as a cylindrical shaft with an inclined square ridge wrapped around it. The distance between two neighboring threads is called the pitch. The lead is the distance the screw advances in...

upward impending motion

Screw Jack Force and Friction Analysis

A square-threaded screw jack lifts heavy loads by turning handle force into a twisting moment. Its upward motion depends on overcoming static friction between the screw threads and the jack. To study this motion, the thread can be treated as if it were a block on the groove of the jack after the thread is completely unraveled. A free-body diagram helps show the forces acting on this simplified system. The force at the handle creates a horizontal force that pushes the movable thread up the...

self-locking screw

Screw Jack Self-Locking Behavior

A square-threaded screw jack can hold a heavy load because of its self-locking behavior. This feature makes the device more reliable when it is used to lift large weights or apply a strong force. If the screw keeps its position after the turning moment is removed, the jack is self-locking. Self-locking happens because friction changes the way the forces act on the thread. The friction force reverses direction, and the reaction force moves to the other side of the thread’s normal. In this case,...

screw: problem solving

Screw Torque and Self-Locking

Screw torque and self-locking are analyzed by looking at a threaded screw shaft and a plate gear. The shaft has a mean radius and a lead. The plate gear also has a mean radius. The coefficient of static friction between the screw and the gear is part of the setup. The first step is to find the static friction angle, φ. This angle is defined by the coefficient of static friction. Next, the lead angle is calculated from the lead and the mean radius of the shaft. It gives the screw geometry...

frictional forces on flat belts

Flat Belt Tension and Friction

Flat belt tension and friction control how power moves from one pulley to another. Flat belts are used in many industrial systems to transmit power between pulleys. As the belt wraps around the pulleys, the tension changes because of friction between the belt and the pulley surface. When a pulley turns counterclockwise, the belt side moving away from the pulley has the higher tension, called T2. The side moving toward the pulley has the lower tension, called T1. To estimate these tensions, the...

flat belts: problem solving

Flat Belt Forces and Pulley Moment

Flat belts transmit power from one pulley to another, and the forces on the belt help determine the moment on a pulley. In this example, a belt wraps around pulleys A and B, with radii of 30 cm and 10 cm. The belt meets the pulleys at a 20 degree angle from the horizontal, which sets up the force balance in the system. As pulley B rotates clockwise, it drives pulley A. That motion creates tension T2 on one side of the belt and tension T1 on the other side. The belt-to-surface contact angle, β,...

pivot bearings

Axial Load Support in Pivot Bearings

Pivot bearings support axial loads on a rotating shaft. A bearing helps two parts move relative to each other while reducing friction and wear. In this design, the pivot is placed at the end of the shaft to carry the axial thrust. The pivot surface can be flat, conical, or truncated, depending on the application. In a flat pivot bearing, the axial load is spread over the bearing area. The pressure is uniform and can be found by dividing the load by the area. To study the forces more closely,...

collar bearings

Collar bearings support axial loads on rotating shafts, and their friction helps determine the torque needed to start motion. They are used in many machines and may have a single collar or multiple collars, depending on the application and load needs. For a single collar bearing under an axial load, the contact area is the ring-shaped region between the external radius and the internal radius of the collar. If the bearing is assumed to support the load evenly, the uniform normal pressure is...

journal bearings

Friction Moment in Journal Bearings

Journal bearings support rotating shafts and axles while helping keep them stable. They are used in machines such as engines, turbines, and pumps. Their job is to reduce friction, wear, and vibration. A journal bearing works by keeping a thin film of lubricant between the bearing surface and the rotating shaft. This film limits direct contact and lowers frictional force. The video uses a rope winch with dry or only partly lubricated journal bearings to show the idea. As the spool turns...

bearings: problem solving

Double-Collar Bearing Torque Calculations

Double-collar bearing torque calculations show how friction and axial force affect bearing performance. Engineers use these calculations to test whether the bearing can handle the forces and moments it experiences during operation. This helps them choose and design bearings for specific applications and setups. For a double-collar bearing with set dimensions and an axial force applied, the maximum frictional moment can be found with a standard expression. The equation is rearranged, and the...

rolling resistance

Tire Deformation and Rolling Resistance

Tire deformation and rolling resistance explain why a rolling wheel still needs a driving force. When a solid cylinder or tire rolls on a rigid surface, the normal force is perpendicular to the surface at the contact point. But real materials are not perfectly rigid, so the surface pushes back with a spread of normal pressures instead of one single force. A hard cylinder on a softer surface compresses the material under it. As the cylinder moves forward, the material in front of the contact...

rolling resistance: problem solving

Lawn Roller Force Calculation

Rolling resistance is the force that makes a rolling object harder to move across a surface. It is also called rolling friction. It comes from deformation in the object and the surface that touch each other. Internal friction, hysteresis, and other energy losses in the materials also play a role. Because of this force, extra energy is needed to keep a wheel, tire, or ball moving. The video applies this idea to a lawn roller. The roller has a mass of 100 kg, a radius of 25 cm, and a coefficient...

key terms and concepts

Learn how collar bearing contact area, pressure, and friction work together to set the torque needed to start shaft rotation in mechanical systems.

Friction Torque in Collar Bearings | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Friction Torque in Collar Bearings

Description

Transcript