Name: blank solutions in analytical testing
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 56 s
Channel: JoVE

분석물을 제외한 분석의 모든 구성 요소를 포함하는 용액을 blank solution이라고 합니다.
동일한 조건에서 blank 용액은 표준 용액 및 테스트 샘플과 동일한 기기로 측정됩니다. 이 blank determination은 시약과 용매의 불순물로 인한 모든 체계적인 오류 및 오류를 나타냅니다.
블랭크의 값은 오류를 제거하기 위해 표준 용액 또는 테스트 샘플과 같은 모든 후속 측정 값에서 뺍니다. blank 및 standard 용액의 값이 보정 곡선을 생성하는 반면, 테스트 샘플에서 얻은 값은 분석물의 알려지지 않은 농도를 정확하게 측정하는 데 사용됩니다.
적정 분석에서는 적정제의 불순물로 인한 오류를 제거하기 위해 blank solution이 사용됩니다.

공란 용액

공란 용액은 분석물 또는 시험 또는 측정되는 관심 물질이 포함되지 않은 용액입니다. 일반적으로 표본 용액과 동일한 시약 및 절차를 사용하여 준비하지만 분석물을 추가하지 않습니다. 공란 용액을 준비하는 주요 목적은 분석 방법의 정확성과 신뢰성에 영향을 줄 수 있는 배경 간섭 또는 오염을 고려하는 것입니다.

일부 실험 사례에서 분석에 사용된 시약, 용매 또는 실험실 장비는 감지 가능한 신호를 생성할 수 있습니다. 공란 용액을 측정하면 이 배경 신호를 결정하고 표본 용액의 측정값에서 빼서 관찰된 신호가 전적으로 분석물에 기인하는지 확인할 수 있습니다. 실험실 환경은 먼지, 공기 중 입자 또는 이전 실험의 잔류물과 같은 오염 물질을 도입할 수도 있습니다. 따라서 공란 용액은 표본 준비 또는 분석 중에 오염을 식별하고 수정하는 데 도움이 됩니다.

또한 공란 용액은 때때로 기기 또는 측정 시스템을 교정하는 데 사용됩니다. 공란 용액으로 기준선을 설정함으로써 기기의 응답을 표준화하고 후속 표본 분석을 위해 얻을 수 있는 정확한 측정값을 제공할 수 있습니다.

블랭크 용액은 분석물 또는 테스트 또는 측정 중인 관심 물질을 포함하지 않는 용액입니다. 그것은 일반적으로 사용하여 준비됩니다 ...

Education

교육

JoVE Core

Analytical Chemistry

분석 화학

Unit 1

제1단원

Method Development and Sampling Techniques

분석법 개발 및 시료 채취 기술

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Blank Solutions

blank solutions in analytical testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte.

The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on their own. By measuring the blank first, scientists can identify that background signal and subtract it from the sample result.

Blank solutions also help detect contamination from the lab environment. Dust, airborne particles, or residues from earlier experiments can affect the analysis. In some cases, a blank solution is also used to calibrate instruments or measurement systems. It establishes a baseline so later sample measurements can be standardized and more accurate.

Blank Solutions in Analytical Testing

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling Materials in Solid, Liquid, Gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Learn how blank solutions help high school lab testing by setting a baseline, reducing background interference, and correcting contamination in sample analysis.

Blank Solutions in Analytical Testing | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Blank Solutions in Analytical Testing

Description

Transcript

Tags