Name: sample transport and storage basics
Uploaded: 2024-12-05T18:31:55.000Z
Duration: 1 min 2 s
Channel: JoVE

시료 취급은 정확한 결과를 보장하기 위해 보관과 운송이라는 두 가지 중요한 측면으로 구성됩니다. 
운송은 물리적 또는 화학적 특성의 변화 없이 샘플을 실험실로 옮기는 과정을 말합니다. 운송 중 샘플의 특성에 따라 변화를 방지하기 위해 냉동 및 화학적 보존과 같은 보존 기술이 필요할 수 있습니다.
예를 들어, 동결은 온도에 민감한 샘플의 열 분해를 방지합니다. 항균제와 같은 화학 방부제를 샘플에 첨가하면 미생물 성장을 방지할 수 있습니다.
실험실에서는 시료 분해를 방지하기 위해 시료를 적절하게 보관하는 것이 필수적입니다. 예를 들어, 열에 불안정한 샘플은 밀봉된 용기에 포장되거나 냉장고에 보관되거나 냉동됩니다.
빛에 민감한 액체 샘플은 어두운 환경이나 호박색 병에 보관해야 합니다.

표본 취급

표본을 수집 지점에서 실험실로 운반하는 것과 보관 및 보존 기술은 표본 무결성을 유지하고 정확하고 신뢰할 수 있는 검사 결과를 보장하는 데 매우 중요합니다.

표본은 수집 지점에서 실험실로 조심스럽게 운반해야 합니다. 교차 오염을 방지하기 위해 표본을 적절히 밀봉하고 명확하게 라벨을 붙여야 합니다. 표본 무결성을 유지하려면 운송 중 최적의 온도 조건이 필수적입니다. 여기에는 필요한 온도 범위를 유지하기 위해 단열 용기, 냉각팩 또는 냉장 차량을 사용하는 것이 포함될 수 있습니다.

표본이 실험실에 도착하면 표본 유형에 따라 적절한 보관 조건을 구현해야 합니다. 예를 들어, 생물학적 표본은 종종 냉장 또는 냉동이 필요한 반면, 다른 표본은 실온 보관이 필요할 수 있습니다. 빛에 민감한 표본은 햇빛으로부터 보호해야 하며, 불투명 용기를 사용하거나 표본을 빛 차단 재료로 감싸서 보호할 수 있습니다.

보존 기술은 표본의 특성에 따라 크게 다릅니다. 화학적 보존에서는 특정 화학 물질을 표본에 추가하여 미생물 성장이나 표본을 변경할 수 있는 화학 반응을 방지할 수 있습니다. 혈액 표본을 채취할 때 적절한 항응고제를 첨가하면 응고를 방지하고 보관 중에 세포 구성 요소의 무결성을 유지할 수 있습니다.

수집 지점에서 실험실로의 샘플 운송과 보관 및 보존 기술은 샘플을 유지하는 데 매우 중요합니다.

Education

교육

JoVE Core

Analytical Chemistry

분석 화학

Unit 1

제1단원

Method Development and Sampling Techniques

분석법 개발 및 시료 채취 기술

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Sample Handling

sample transport and storage basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results.

Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples arrive at the laboratory, storage conditions must match the sample type. Biological samples often need refrigeration or freezing, while others can stay at room temperature.

Light-sensitive samples need extra protection from sunlight. Opaque containers or light-blocking wraps can reduce exposure. Preservation methods also vary with the sample. In chemical preservation, added chemicals can slow microbial growth or chemical reactions that could change the sample. For blood samples, anticoagulants help prevent clotting and keep cellular components intact during storage.

Sample Transport and Storage Basics

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling Materials in Solid, Liquid, Gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Learn how sample sealing, labeling, temperature control, storage, and preservation help protect specimen integrity and support accurate lab results.

Sample Transport and Storage Basics | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Sample Transport and Storage Basics

Description

Transcript

Tags