Name: reynolds number and pipe flow
Uploaded: 2025-02-13T15:43:29.000Z
Duration: 1 min 27 s
Channel: JoVE

K12 Standards

Virginia  Standards of Learning

HIgh School

Biology

BIO.1

BIO.1.e

Dimensional Analysis

차원 해석은 무차원 그룹을 사용하여 유체 흐름 문제를 단순화하고 복잡한 변수를 더 쉽게 이해할 수 있는 더 간단한 용어로 줄이는 데 도움이 됩니다.
단위 길이당 압력 강하가 파이프 직경, 유체 속도, 유체 밀도 및 점도와 같은 요인에 따라 달라지는 파이프 시스템의 유체 흐름 해석을 고려합니다.
두 개의 무차원 그룹을 형성하면 각 요인을 개별적으로 분석하지 않아도 되므로 단위 길이당 압력 강하와 이러한 요인 간의 관계를 더 쉽게 연구할 수 있습니다.
한 그룹은 단위 길이당 압력 강하와 유체의 동적 특성 사이의 관계를 캡처하고 다른 그룹은 점도 및 흐름 특성에 중점을 둡니다.
이러한 그룹은 다양한 파이프 크기와 유체 유형에 걸쳐 작동하는 곡선을 작성하여 다양한 시스템에 대한 실용적인 솔루션을 제공합니다.
차원 해석은 방정식이 차원적으로 일관성을 유지하도록 하며, 이는 사용된 측정 단위에 관계없이 유효한 물리적 해석에 매우 중요합니다.
또한 차원 해석은 댐이나 강과 같은 유압 시스템의 축소된 모델을 생성하는 데 도움이 되어 전체 테스트 없이 물의 흐름, 침식 및 홍수 거동에 대한 통찰력을 제공합니다.
이 방법은 수도관 또는 자연 및 인공 채널의 유체 흐름과 같은 시스템의 결과를 예측합니다.

차원 분석

차원 분석은 복잡한 문제를 차원이 없는 그룹으로 축소하여 단순화하는 유체 역학에서 귀중한 기술입니다. 이러한 그룹은 관련 변수 간의 필수적인 관계를 포착하여 연구자와 엔지니어가 각 변수를 개별적으로 처리하지 않고도 유체 흐름을 분석할 수 있도록 합니다. 이 접근 방식은 독립 변수의 수를 줄여 더 쉽게 분석하고 물리적 현상을 더 잘 이해할 수 있도록 합니다.

유체 역학에서 차원 분석은 파이프라인, 채널 및 토목 공학에서 일반적인 기타 구조물과 같은 시스템에서 유체의 거동을 이해하는 데 사용됩니다. 물 분배 시스템이나 하수망 설계에서 일반적인 길고 매끄러운 벽의 수평 원형 파이프를 통한 유체 흐름의 예를 생각해 보세요. 파이프를 따라 단위 길이당 압력 강하는 파이프 직경, 유체 밀도, 유체 속도 및 점도와 같은 변수에 따라 달라집니다. 차원 분석에 따르면 압력 강하는 다음 변수의 함수로 표현할 수 있습니다.

<img alt="Equation 1" src="/files/ftp_upload/18067/18067_Equation_1.svg" style="text-align: center; height: 12px;">

이 공식에는 5개의 독립 변수가 포함되어 있어 분석을 복잡하게 만들 수 있습니다. 이를 단순화하기 위해 차원 분석을 사용하여 변수 수를 두 개의 무차원 그룹으로 줄여 문제를 간소화할 수 있습니다. 이 분석에서 나타나는 두 가지 중요한 무차원 그룹은 유동 체계를 특징짓는 레이놀즈 수와 압력 강하와 상관관계가 있는 마찰 계수입니다.

<img alt="Equation 2" src="/files/ftp_upload/18067/18067_Equation_2.svg" style="text-align: center; height: 30px;">

엔지니어는 무차원 그룹을 사용하여 매끄러운 벽의 파이프와 비압축성 뉴턴 유체에 적용되는 범용 곡선을 생성합니다. 이 곡선을 사용하면 각 가능한 조합에 대해 수많은 실험을 수행하지 않고도 다양한 파이프 크기와 유체에 대한 압력 강하를 예측할 수 있습니다.

<img alt="Figure 1" src="/files/ftp_upload/18067/18067_PT_Figure.svg" style="text-align: center; height: 250px;">

이 접근 방식은 실험에 필요한 시간과 비용을 최소화하고 보다 간단한 설계 결정을 내릴 수 있도록 합니다. 물 분배 네트워크를 설계하든 관개 시스템의 압력 손실을 분석하든 차원 분석은 모든 토목 엔지니어에게 중요합니다.

차원 분석은 무차원 그룹을 사용하여 유체 흐름 문제를 단순화하고 복잡한 변수를 더 쉽게 사용할 수 있는 더 간단한 용어로 줄이는 데 도움이 됩니다.

Education

교육

JoVE Core

Civil Engineering

토목공학

Unit 1

제1단원

Dimensional Analysis, Similitude, and Modeling

차원 해석, 상사성 및 모델링

dimensional-analysis-similitude-and-modeling

KEY TERMS AND CONCEPTS

주요 용어 및 개념

reynolds number and pipe flow

Dimensional analysis helps simplify pipe flow problems in fluid mechanics by turning several variables into dimensionless groups. These groups show the key relationships in the system without tracking every variable one by one. They also reduce the number of independent variables, which makes the problem easier to study and understand.

A common example is fluid flow through a long, smooth-walled, horizontal circular pipe. This kind of pipe appears in water distribution systems and sewage networks. In this case, the pressure drop per unit length depends on pipe diameter, fluid density, fluid velocity, and viscosity.

Dimensional analysis can reduce this five-variable problem to two dimensionless groups. One is the Reynolds number, which describes the flow regime. The other is the friction factor, which relates to the pressure drop.

Engineers use these groups to build a universal curve for any smooth-walled pipe and incompressible Newtonian fluid. That curve can predict pressure drop for different pipe sizes and fluids without testing every possible case. It saves time and cost and supports better design choices in projects such as water distribution networks and irrigation systems.

Reynolds Number and Pipe Flow

dimensional analysis

Dimensional analysis helps simplify pipe flow problems in fluid mechanics by turning several variables into dimensionless groups. These groups show the key relationships in the system without tracking every variable one by one. They also reduce the number of independent variables, which makes the problem easier to study and understand. A common example is fluid flow through a long, smooth-walled, horizontal circular pipe. This kind of pipe appears in water distribution systems and sewage...

the buckingham pi theorem

Reynolds Number from Buckingham Pi

The Buckingham Pi theorem turns fluid flow variables into dimensionless terms. In a pipe flow example, the key variables are the pipe diameter, fluid velocity, density, and viscosity. These variables can be combined into one dimensionless group, the Reynolds number, which captures their relationship. Applying the theorem starts with identifying the fundamental dimensions of each variable. In fluid mechanics, these dimensions are mass, length, and time. The pipe diameter represents length,...

determination of pi terms

Buckingham Pi Terms for Wing Lift

Buckingham Pi terms help simplify the study of lift force on an airplane wing. Dimensional analysis is used to turn several related variables into dimensionless terms, which makes the problem easier to work with. The wing-lift example uses five variables: lift force, air density, wing area, aircraft velocity, and air viscosity. Each variable is written in fundamental dimensions of mass, length, and time. The Buckingham Pi theorem then shows that the number of Pi terms equals the total number...

dimensionless groups in fluid mechanics

Key Fluid Flow Ratios for Modeling

Dimensionless groups in fluid mechanics are key ratios that make fluid behavior easier to compare without using specific units. These numbers help simplify analysis across different flow situations. The Reynolds number, or Re, compares inertial forces to viscous forces. It helps show whether a flow is laminar or turbulent and is important in pipeline and aerodynamic surface design. Other dimensionless numbers describe how fluid flow responds to gravity, pressure, elasticity, and speed. The...

correlation of experimental data

Using Experimental Data in Dimensional Analysis

Dimensional analysis helps organize experimental data and test physical relationships. It can simplify a complex problem and point to the key dimensionless groups that matter. But it does not give a full solution by itself. Experimental data is needed to find the exact relationship and to check theoretical predictions. In the example of a spherical particle moving through a viscous fluid, dimensional analysis shows that drag force depends on the particle’s diameter, velocity, and the fluid’s...

modeling and similitude

Scaled Models for Testing Dams and Ships

Scaled models help engineers study large systems in a smaller, controlled setup. They are useful when a full-size test would cost too much or take too long. In civil infrastructure and hydrology, a scaled dam model can show how water flow, turbulence, and pressure will behave in the real structure. For a model to give useful results, it must keep similitude. Similitude means the model matches the prototype, or full-size system, in important ways. Geometric similarity keeps the shape and...

typical model studies

River and Spillway Model Design

River and spillway model design uses scaled systems to predict how fluid will behave in full-scale settings. These model studies help engineers study river flow, dam spillways, and structures that interact with open surfaces. For river models, Froude number similarity is important. The Froude number compares inertial and gravitational forces, and matching it helps copy surface flow features such as wave patterns and velocity. Practical limits can cause geometric distortion, which means the...

design example: creating a hydraulic model of a dam spillway

design-example-creating-a-hydraulic-model-of-a-dam-spillway

Testing Spillway Flow with a Scale Model

A scale model of a dam spillway is used to study how water moves over the structure. These hydraulic models are often built at a 1:15 ratio. They help show flow speed, flow patterns, and energy dissipation, which is the loss of water energy as flow moves through the spillway. Researchers use the model to watch how water behaves in a controlled setting. They can examine velocity distribution, wave formation, turbulence, and flow separation. These details help them see how the spillway performs...

key terms and concepts

Learn how dimensional analysis reduces pipe flow into Reynolds number and friction factor, helping engineers predict pressure drop in pipes and channels.

Reynolds Number and Pipe Flow | JoVE K12

JoVE Core Civil Engineering offers a foundational exploration of essential construction materials such as bricks, stones, steel, wood, and concrete, along with fluid mechanics topics like flow over immersed bodies, open channel flow, and dimensional modeling. It also covers key surveying concepts, including leveling, traverse adjustments, curve design, topographic mapping, and geospatial technologies (GPS & GIS). Science-in-action videos showcase laboratory research on materials, fluids, and surveying practices in real-world engineering systems.

civil engineering

Chemistry

CH.1

CH.1.e

The Scientific Method

The scientific method is a detailed, empirical problem-solving process used by biologists and other scientists. This iterative approach involves ...

Inductive Reasoning

Inductive reasoning is a form of logical thinking that uses related observations to arrive at a general conclusion. It is uncertain and operates in ...

Deductive Reasoning

Deductive reasoning, or deduction, is the type of logic used in hypothesis-based science. In deductive reasoning, the pattern of thinking moves in the ...

Correlation and Causation

Correlation and CausationStatistical tests can calculate whether there is a relationship, or correlation, between independent and dependent variables. A ...

The student will demonstrate an understanding of scientific and engineering practices by asking questions and defining problems
• ask questions that arise from careful observation of phenomena and/or
organisms, from examining models and theories, and/or to seek additional
information
• determine which questions can be investigated within the scope of the
school laboratory or field to determine relationships between independent
and dependent variables
• generate hypotheses based on research and scientific principles
• make hypotheses that specify what happens to a dependent variable when
an independent variable is manipulated

BIO.1.a

Case Studies

There are many research methods available to psychologists in their efforts to understand, describe, and explain behavior and the cognitive and biological ...

Naturalistic Observations

If you want to understand how behavior occurs, one of the best ways to gain information is to simply observe the behavior in its natural context. However, ...

Surveys

Often, psychologists develop surveys as a means of gathering data. Surveys are lists of questions to be answered by research participants, and can be ...

Archival Research

Some researchers gain access to large amounts of data without interacting with a single research participant. Instead, they use existing records to answer ...

Longitudinal Research

Sometimes we want to see how people change over time, as in studies of human development and lifespan. When we test the same group of individuals ...

Cross-Sectional Research

In cross-sectional research, a researcher compares multiple segments of the population at the same time. If they were interested in people&#39;s dietary ...

Group Design

The most basic experimental design involves two groups: the experimental group and the control group. The two groups are designed to be the same except ...

Factorial Design

Factorial Analysis is an experimental design that applies Analysis of Variance (ANOVA) statistical procedures to examine a change in a dependent variable ...

The Placebo Effect

The placebo effect occurs when people&#39;s expectations or beliefs influence or determine their experience in a given situation. In other words, simply ...

Blind Procedures

Ideally, the people who observe and record the children&rsquo;s behavior are unaware of who was assigned to the experimental or control group, in order to ...

Ethics in Research

Today, scientists agree that good research is ethical in nature and is guided by a basic respect for human dignity and safety. However, this has not ...

The student will demonstrate an understanding of scientific and engineering practices by planning and carrying out investigations
 • individually and collaboratively plan and conduct observational and experimental investigations 
 • plan and conduct investigations or test design solutions in a safe and ethical manner including considerations of environmental, social, and personal effects
• determine appropriate sample size and techniques 
 • select and use appropriate tools and technology to collect, record, analyze, and evaluate data

BIO.1.b

Introduction to Statistics

The science of statistics involves collecting, analyzing, interpreting, and presenting data. The method of collecting, organizing, and summarizing data is ...

How Data are Classified: Categorical Data

A variable, usually notated by capital letters such as X and Y, is a characteristic or measurement that can be determined for each member of a population. ...

How Data are Classified: Numerical Data

Data that are countable or measurable in specific units are called numerical or quantitative data. Quantitative data are always numbers. Quantitative data ...

Ogive Graph

An ogive graph is sometimes called a cumulative frequency polygon. It is one type of frequency polygon that shows cumulative frequency. In other words, ...

Histogram

The histogram is a graphical representation in the x-y form of data distribution in a data set. The horizontal x-axis is labeled with what the data ...

Relative Frequency Histogram

The relative frequency depicts the proportion of data points that have each value. The frequency tells the number of data points that have each value. ...

Scatter Plot

The most common and easiest way to display the relationship between two variables, x and y, is a scatter plot. A scatter plot shows the direction of a ...

Time-Series Graph

A time-series graph is a line graph with repeated measurements taken at successive intervals of time. It is also called a time series chart. To construct ...

Bar Graph

A bar graph is also called a bar chart and consists of bars that are separated from each other. It either uses horizontal or vertical bars to show ...

Multiple Bar Graph

As the name suggests, a multiple bar graph is the same as a bar graph but has multiple bars to depict relationships between different data values. One can ...

Pareto Chart

A Pareto chart is a bar graph or a combination of both line and bar graphs. The bar lengths represent the individual values or the frequency, while the ...

Pie Chart

A pie chart (or a pie graph) is a circular graphical chart or a pictorial representation of categorical data. It is divided into slices of pie each ...

What is Central Tendency?

Descriptive statistics describe or summarize relevant characteristics of a sample and aid in the analysis of data of interest. When analyzing large ...

Arithmetic Mean

The arithmetic mean is the most commonly used measure of the central tendency of a data set. It is defined as the sum of all the elements constituting the ...

Mean From a Frequency Distribution

Sometimes, data gathered from an experiment on a large sample or population are organized into concise tables. In such cases, the frequency of the ...

What is a Mode?

The mode is one of the commonly used measures of a central tendency. It is defined as the most frequent value in a data set.
There can be more than one ...

Bias

Bias refers to any tendency that prevents a question from being considered unprejudiced. In research, bias occurs when one outcome or answer is selected ...

Median

Besides mean, the median is a widely used measure of central tendency. Typically, median is defined as the central or middle value of a data set, measured ...

Blinding

Blinding is a commonly used method of not telling participants which treatment a subject is receiving. Blinding is a critical part of a randomized control ...

Midrange

A somewhat easy to compute quantitative estimate of a data set&#8217;s central tendency is its midrange, which is defined as the mean of the minimum and ...

Clinical Trials

Clinical trials are prospective experimental studies conducted on humans to determine the safety and efficacy of treatments, drugs, diet methods, and ...

What is Variation?

Apart from the measures of central tendency, distribution, outliers, and the changing characteristics of data with time, an important characteristic of ...

Range

The range is one of the measures of variation. It can be defined as the difference between a dataset&#39;s highest and lowest values. For example, in the ...

Standard Deviation

The most commonly used measure of variation is the standard deviation. It is a numerical value measuring how far data values are from their mean. The ...

Standard Error of the Mean

The sampling variability of a statistic is defined as how much the statistic varies from one sample to another. The sampling variability of a statistic is ...

Calculating Standard Deviation

The standard deviation is the most common measure of variation. It is a value that tells us how far a data value is from the mean value in a dataset. ...

Crossover Experiments

Crossover experiments, also called the repeated-measurements design, is a study design in which all experimental units are exposed to all treatments in ...

Controls in Experiments

When conducting an experiment, it is crucial to have control to reduce bias and accurately measure the dependent variables. It also marks the results more ...

The student will demonstrate an understanding of scientific and engineering practices by interpreting, analyzing, and evaluating data 
 • construct and interpret data tables showing independent and dependent variables, repeated trials, and means
 • construct, analyze, and interpret graphical displays of data
 • use data in building and revising models, supporting an explanation for phenomena, or testing solutions to problems
 • analyze data using tools, technologies, and/or models to make valid and reliable scientific claims or determine an optimal design solution

BIO.1.c

What is a Hypothesis?

A hypothesis can be a simple sentence or statement about a property or any phenomenon observed or predicted for a population. It is usually a claim about ...

Null and Alternative Hypotheses

The actual hypothesis testing begins by considering two hypotheses. They are termed&#160; the null hypothesis and the alternative hypothesis. These ...

critical-region-critical-values-and-significance-level

Critical Region, Critical Values and Significance Level

The critical region, critical value, and significance level are interdependent concepts crucial in hypothesis testing.
In hypothesis testing, a sample ...

P-value

P-value is one of the most crucial concepts in statistics.
P-value stands for the probability value. &#160;P-value is the probability that, if the null ...

Types of Hypothesis Testing

There are three types of hypothesis tests: right-tailed, left-tailed, and two-tailed.
When the null and alternative hypotheses are stated, it is observed ...

The student will demonstrate an understanding of scientific and engineering practices by  constructing and critiquing conclusions and explanations
• make quantitative and/or qualitative claims regarding the relationship between dependent and independent variables 
• construct and revise explanations based on valid and reliable evidence obtained from a variety of sources including students' own investigations, models, theories, simulations, and peer review 
• apply scientific ideas, principles, and/or evidence to provide an explanation of phenomena and design solutions 
• compare and evaluate competing arguments or design solutions in light of currently accepted explanations and new scientific evidence
• construct arguments or counterarguments based on data and evidence differentiate between a scientific hypothesis and theory

BIO.1.d

Dimensional analysis helps simplify fluid flow problems by using dimensionless groups, reducing complex variables into simpler terms that are easier to ...

Modeling and Similitude

A scaled model of a dam is tested in a controlled environment to observe how it will manage water flow, turbulence, and pressure.
This setup predicts the ...

Typical Model Studies

Typical model studies analyze scaled-down systems to predict fluid behavior, focusing on interactions with free surfaces and flow around immersed bodies.
...

The student will demonstrate an understanding of scientific and engineering practices by  developing and using models
• evaluate the merits and limitations of models
• develop, revise, and/or use models based on evidence to illustrate or predict relationships 
• develop and/or use models to generate data to support explanations, predict phenomena, analyze systems, and/or solve problems

Communication Process

The communication process is the transmission and reception of messages or information from one sender to the receiver.
It involves the sender encoding an ...

Communication Objectives

Marketing communication objectives refer to the strategic goals that guide promotional activities.
They set the stage for messaging strategies, content ...

The student will demonstrate an understanding of scientific and engineering practices by  obtaining, evaluating, and communicating information 
• compare, integrate, and evaluate sources of information presented in different media or formats to address a scientific question or solve a problem
• gather, read, and evaluate scientific and/or technical information from multiple authoritative sources, assessing the evidence and credibility of each source
• communicate scientific and/or technical information about phenomena in multiple formats

BIO.1.f

Reynolds Number and Pipe Flow

Description

Transcript

Tags

More videos by Standards