Name: modeling event risk over time
Uploaded: 2025-01-09T15:14:17.000Z
Duration: 1 min 11 s
Channel: JoVE

임상 연구에서 피험자 또는 참가자는 죽음과 같은 사건이 한 번만 발생하는 시간 간격 동안 관찰됩니다.
이제, 참가자가 시간 t0까지 생존하는 경우, 시간 간격 t0에서 t1 동안의 사망 확률은 λ (t1 - t0)로 표현될 수 있습니다.
이 수량은 단위 시간당 사망자로 계산되는 위험률입니다.
연구에 n명의 개인이 있다고 가정합니다. i번째 개인의 관찰은 Bi 에서 시작되며 그들이 죽으면 사망 시간은 Di 입니다. Ci를 참가자가 살아있는 시간이라고 합시다.
따라서 각 개인이 사망 위험에 처한 시간은 다음과 같이 표현됩니다.
그런 다음 다음 표현식을 사용하여 위험률을 계산합니다.
방정식에서 수량 L(관찰된 사망자 수)은 푸아송 분포에 가깝습니다.
위험률이 높을수록 시간이 지남에 따라 더 많은 사망자가 발생한다는 것을 의미하고, 위험률이 낮을수록 시간이 지남에 따라 사망자가 적다는 것을 의미합니다.

위험률

Hazard Rate

위험률은 위험 함수 또는 실패율이라고도 하며, 사건이 아직 발생하지 않은 상황에서 사건이 발생하는 순간적인 속도를 설명하는 데 사용되는 통계적 척도입니다. 확률적 관점에서, 이는 피험자가 해당 간격의 시작까지 생존한다는 조건 하에 매우 짧은 시간 간격에서 사건을 경험할 가능성을 나타냅니다. 빈도 측면에서 위험률은 총 위험 시간에 대한 사건 수의 비율로 볼 수 있으므로 시간이 지남에 따라 사건이 발생하는 빈도를 정규화된 척도로 제공합니다.

위험률은 사건의 위험이 시간에 따라 어떻게 변하는지 설명하는 함수입니다. 일반적으로 생존 분석 및 신뢰성 엔지니어링에서 시간 대 사건 자료를 모델링하는 데 사용됩니다. 위험률은 시간에 따라 달라질 수 있으며, 연구 중인 과정의 특성에 따라 증가, 감소 또는 일정할 수 있습니다. 시간에 따른 위험률의 적분을 사용하여 누적 위험 함수를 도출할 수 있으며, 이는 주어진 기간 동안 누적된 위험을 측정합니다.

임상 연구 분야에서 위험률은 생존 및 실패 시간의 역학을 이해하는 데 중요합니다. 특히 연구자들이 사망, 질병 재발 또는 회복과 같은 사건에 관심이 있는 시간-사건 자료 분석에 유용합니다. 임상 시험은 종종 위험률을 사용하여 치료의 효과를 비교하거나 생존에 대한 위험 요소의 영향을 평가합니다. 이 맥락에서 통계 분석은 관찰된 자료에서 위험률을 추정하는 것을 포함하며, 일반적으로 생존 함수에 대한 카플란-마이어 추정자 또는 공변량의 영향을 평가하기 위한 Cox 비례 위험 모델과 같은 방법을 사용합니다. 이러한 방법을 사용하면 연구자는 일부 피험자가 연구 기간이 끝날 때까지 사건을 경험하지 못할 수 있는 검열을 고려하고 기본 위험 구조에 대한 추론을 할 수 있습니다. 위험률을 분석함으로써 임상 연구자는 사건의 타이밍과 가능성에 대한 통찰력을 얻어 치료 전략과 의료 정책에 정보를 제공할 수 있습니다.

임상 연구에서 피험자 또는 참가자는 죽음과 같은 사건이 한 번만 발생하는 시간 간격 동안 관찰됩니다.
자, 만약 ...

Education

교육

JoVE Core

Statistics

통계학

Unit 1

제1단원

Survival Analysis

생존 분석

KEY TERMS AND CONCEPTS

주요 용어 및 개념

modeling event risk over time

Hazard rate is a statistical measure that describes how event risk changes over time. It is also called the hazard function or failure rate. In survival analysis, it shows the instantaneous rate at which an event occurs, but only after the subject has not had the event yet.

From a probability view, hazard rate gives the chance that a subject will have the event in a very small time interval. That chance is conditional on surviving to the start of that interval. From a frequency view, it can also be treated as the number of events divided by the total time at risk. This makes it a normalized way to measure how often events happen over time.

The hazard rate is a function, so it can change as time passes. In some cases, it increases. In other cases, it decreases or stays constant. Researchers use this pattern to study time-to-event data in survival analysis and reliability engineering.

The cumulative hazard function is found by integrating the hazard rate over time. It shows the total risk that builds up over a period. In clinical studies, hazard rate is important for understanding survival and failure times. Researchers use it to study events such as death, disease recurrence, or recovery.

Clinical trials often compare hazard rates to judge how well treatments work or to see how risk factors affect survival. Estimating hazard rates from data often involves the Kaplan-Meier estimator for survival functions or Cox proportional hazards models for covariates. These methods also handle censoring, which happens when some subjects do not have the event before the study ends. By studying hazard rates, researchers can better understand when events happen and how likely they are to occur.

Modeling Event Risk Over Time

introduction to survival analysis

Time-to-Event Data and Censoring

Survival analysis is a statistical method for time-to-event data. The event can be death, disease relapse, system failure, or recovery. It helps estimate survival time, which is the time until a specific event occurs, and it also shows what factors may affect that time. A key idea in survival analysis is censoring. Censoring happens when the event of interest has not been observed for some people during the study period. Because the data are incomplete in those cases, survival analysis uses...

life tables

Life Tables and Survival Patterns

A life table is a statistical tool that shows mortality and survival patterns in a population. It organizes data across age intervals so students can see how likely a group is to survive or die at each stage of life. The table gives a clear snapshot of population dynamics over time. Life tables are used in demography, public health, actuarial science, and ecology. They help scientists study life expectancy, plan health interventions, estimate insurance risk, and compare how species survive in...

survival curves

Kaplan-Meier Survival Curve Basics

Kaplan-Meier survival curves show how the chance of staying event-free changes over time. They are used to track survival in a population and to compare groups in medicine, public health, and reliability engineering. The Kaplan-Meier estimator is the most common way to build these curves. It is a non-parametric method, which means it does not assume a fixed pattern for the data. The result is a stepwise line that drops each time an event happens, such as death, disease recurrence, or...

actuarial approach

Life Table Method for Survival Rates

The life table method, also called the actuarial approach, is used to estimate survival rates in clinical and population studies. It began in life insurance, where risk over time must be measured carefully. In health research, it gives a clearer picture of survival when some participants are lost to follow-up or die from causes unrelated to the study. This method works by dividing the study period into set intervals, usually one year. That makes it useful for tracking outcomes over time,...

kaplan-meier approach

Survival Curves with Kaplan-Meier Data

The Kaplan-Meier estimator is a non-parametric method for estimating a survival function from time-to-event data. It is commonly used in medical research to track how many patients survive for a set time after treatment. It is also important in clinical trials, epidemiological studies, and reliability engineering. This method helps researchers study survival probabilities over time, even when some data are incomplete. That incomplete data is called censored data, which means the exact event...

assumptions of survival analysis

Survival Analysis Assumptions in Studies

Survival analysis studies the time until an event happens. The event may be death in a living organism or failure in a mechanical system. These models are used in medicine, biology, engineering, and public health to study time-to-event data. Careful study design matters because the method depends on several key assumptions. One common feature of survival times is positive skewness. This means events often happen early, while fewer cases occur later. Survival data also often include censoring,...

comparing the survival analysis of two or more groups

comparing-the-survival-analysis-of-two-or-more-groups

Kaplan-Meier Curves and Hazard Ratios

Kaplan-Meier curves and hazard ratios help researchers compare survival time between groups. Survival analysis looks at the time until an event happens, such as death, disease recurrence, or recovery. It is a key tool in medical research. A major strength of survival analysis is that it can handle censored data. Censored data means the event has not happened for some participants by the end of the study, or it has not been observed. This makes survival analysis different from standard...

the mantel-cox log-rank test

Log-Rank Test for Comparing Survival Curves

The Mantel-Cox log-rank test compares survival curves from two groups. It checks whether the groups have a statistically significant difference in survival time. This makes it useful when the timing of an event matters, such as death or disease recurrence. The log-rank test is non-parametric. That means it does not assume a specific distribution for the survival data. It is also useful in medical research, where it often helps compare a new treatment with a control or standard treatment in...

applications of life tables

Life Tables in Public Policy and Science

Life tables are used in many fields to study mortality and survival rates. They give a numerical way to examine how long people or living things are likely to survive. This makes them useful for public health, business planning, and scientific research. In demography and public health, life tables help experts study population changes and predict future trends. They can show patterns such as an aging population or the effect of a health policy. In Nigeria, health officials used survival rates...

cancer survival analysis

Cancer Survival Curves and Risk Factors

Cancer survival analysis measures how long it takes from diagnosis or the start of treatment to a specific outcome, such as remission or death. It helps researchers judge treatment effectiveness and understand what affects patient outcomes. These results also support clinical decisions and prognostic evaluations. Survival data are often skewed and not normally distributed. They also include censored cases, where the full survival time is unknown because the study ends, a patient is lost to...

hazard rate

Hazard rate is a statistical measure that describes how event risk changes over time. It is also called the hazard function or failure rate. In survival analysis, it shows the instantaneous rate at which an event occurs, but only after the subject has not had the event yet. From a probability view, hazard rate gives the chance that a subject will have the event in a very small time interval. That chance is conditional on surviving to the start of that interval. From a frequency view, it can...

hazard ratio

Hazard Ratio in Clinical Trials

The hazard ratio is a way to compare event risk in clinical trials. It is often used to study events such as death or disease recurrence in two groups over time. The two groups are usually a treatment group and a control group. A hazard ratio compares hazard rates, which are the instantaneous risk of an event happening at a given moment. It shows how the risk in one group relates to the risk in the other group. In a cancer drug study, for example, the hazard ratio can show how a new treatment...

truncation in survival analysis

Left and Right Truncation in Survival Data

Truncation in survival analysis describes data loss caused by the timing of an event or by when a subject can enter a study. It can happen in two forms: left truncation and right truncation. In both cases, some individuals are left out of the dataset before analysis begins. Left truncation happens when people who had the event before a set time are not included in the study. This often occurs with delayed entry, which means a person is only observed if they survive until the entry point. For...

censoring survival data

Types of Censoring in Survival Analysis

Survival analysis studies time-to-event data, which tracks how long it takes for an outcome to happen. It is used in medicine, engineering, and social science. A common problem in this type of data is censoring, which means the full event time is not observed for every person or item. Censoring can happen for several reasons and in different patterns. The most common kind is right censoring. This happens when the event has not occurred by the end of the study or when a participant is lost to...

survival tree

Survival Tree in Time-to-Event Analysis

A survival tree is a non-parametric tool in survival analysis that links predictor variables, or covariates, to survival time. Survival time is the time until an event of interest occurs. It is useful when some data are censored, which means the event has not happened for some people by the end of the study or the exact event time is unknown. Building a survival tree starts with a dataset that includes covariates, survival time, and a censoring indicator for each subject. The data must be...

parametric survival analysis: weibull and exponential methods

parametric-survival-analysis-weibull-and-exponential-methods

Modeling Survival Time with Weibull and Exponential

Parametric survival analysis models survival time by assuming a specific probability distribution for when an event occurs. The Weibull and exponential distributions are two common choices because they are flexible and relatively straightforward to use. The Weibull distribution is a flexible model in parametric survival analysis. It can describe both increasing and decreasing hazard rates, depending on its shape parameter beta. When beta is greater than 1, the hazard rate rises over time. That...

key terms and concepts

Learn how hazard rate measures the changing risk of an event over time, with uses in survival analysis, clinical studies, and reliability engineering.

Modeling Event Risk Over Time | JoVE K12

statistics

JoVE Core Statistics introduces the concepts and application of the collection, analysis, presentation, and interpretation of data to students. These animated lessons provide an understanding of statistics beneficial to students from a wide range of disciplines. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide

Modeling Event Risk Over Time

Description

Transcript