Question 1

What is the relationship between absorbance and concentration in Beer's Law?

Accepted Answer

Beer's Law establishes a linear relationship between absorbance and concentration when wavelength and pathlength are held constant. The equation A = εlc shows that absorbance is directly proportional to the molar attenuation coefficient, pathlength, and concentration. This linear relationship allows chemists to determine unknown concentrations by measuring absorbance values against a standard curve.

Question 2

How does a spectrophotometer measure absorbance?

Accepted Answer

A spectrophotometer directs a beam of light through a sample and measures the change in light intensity before and after passing through. It calculates absorbance as the negative log of transmitted light intensity divided by incident light intensity. The instrument uses a diffraction grating or prism to separate light into component wavelengths and a CCD detector to record intensity at specific wavelengths.

Question 3

Why do electrons transition to higher energy levels when absorbing light?

Accepted Answer

When a molecule absorbs light with energy equal to the difference between two electron energy states, electrons become excited and transition to higher energy levels. According to Bohr's model, electrons occupy fixed, discrete energy states and only transition when absorbed photon energy exactly matches the energy difference between states. This excitation moves electrons from the ground state to excited states like n = 2 or n = 3.

Question 4

What role does the molar attenuation coefficient play in Beer's Law?

Accepted Answer

The molar attenuation coefficient, represented by epsilon in Beer's Law, is a constant that measures how strongly a specific compound absorbs light at a given wavelength. It varies for each compound and directly affects absorbance values. A greater molar attenuation coefficient indicates stronger light absorption, making it essential for calculating unknown concentrations from measured absorbance data.

Question 5

How is a spectrophotometer calibrated before measuring samples?

Accepted Answer

A spectrophotometer is calibrated using a blank, which is a cuvette containing only the solvent without the solute. This calibration subtracts the absorbance from the cuvette and solvent, ensuring that measured absorbance reflects only the species of interest. Standard cuvettes have a pathlength of 1 cm, which is used in Beer's Law calculations.

Question 6

How can Beer's Law determine equilibrium concentrations in chemical reactions?

Accepted Answer

By measuring absorbance of a product at equilibrium using a spectrophotometer, Beer's Law allows calculation of the product's equilibrium concentration. Once the product concentration is known, equilibrium concentrations of reactants can be determined using stoichiometry. These values then enable calculation of the equilibrium constant, K, which is the ratio of product concentrations to reactant concentrations.

Question 7

What is a standard curve and how does it apply Beer's Law?

Accepted Answer

A standard curve is generated by plotting absorbance versus concentration for solutions with known solute concentrations. This produces a linear relationship matching Beer's Law equation, with slope equal to the product of pathlength and molar attenuation coefficient. Using this curve, an unknown sample's concentration can be determined by measuring its absorbance and reading the corresponding concentration value.

맥주의 법칙