Question 1

Why are round-bottom flasks preferred for heating organic reactions?

Accepted Answer

Round-bottom flasks are preferred for high-heat or vacuum reactions because their round shape is more resistant to cracking than flat-bottomed glassware. The curved design also provides more surface area for uniform heating or cooling. This makes them ideal for reactions requiring sustained temperature control or pressure changes.

Question 2

What is reflux and why is it used in organic chemistry?

Accepted Answer

Reflux is a technique that prevents solvent loss during prolonged heating. A condenser fitted to a round-bottom flask allows heated solvent vapors to condense and return to the flask, preserving reaction volume. Cold water flows through the condenser from bottom to top while the mixture is heated and stirred, maintaining optimal reaction temperature without evaporative loss.

Question 3

What is the difference between gravity filtration and vacuum filtration?

Accepted Answer

Gravity filtration uses a simple setup with a glass funnel and filter paper, relying on gravity to separate solids from liquids. Vacuum filtration is faster and uses a Büchner funnel connected to a vacuum flask with a side arm. The vacuum applies suction to pull liquid through the filter paper more quickly, making it ideal for time-sensitive lab work.

Question 4

Why shouldn't Bunsen burners be used to heat organic compounds?

Accepted Answer

Organic compounds and solvents are highly flammable and readily form combustible vapors. An open flame from a Bunsen burner creates a dangerous fire hazard in organic chemistry labs. Instead, indirect heating methods like hot plates, heating mantles, and water baths provide safe temperature control without flame exposure.

Question 5

How should you properly weigh solid organic reagents in the lab?

Accepted Answer

Place a weighing boat or paper on an analytical or top-loading balance and press tare to zero the mass. Use a spatula to transfer solid from the stock bottle to the weighing boat. Never reuse the same spatula for different reagents to avoid contamination, and never return excess reagent to the stock bottle.

Question 6

What heating method should be used for reactions requiring temperatures above 100°C?

Accepted Answer

For temperatures between 100°C and 250°C, use a silicone heating mantle designed for round-bottom flasks to provide uniform, indirect heat. For temperatures exceeding 250°C, use a sand bath instead. Heating mantles and sand baths are safer than open flames for organic reactions requiring high temperatures.

Question 7

What is the purpose of using the smallest appropriate graduated cylinder for volume measurement?

Accepted Answer

Using the smallest graduated cylinder suitable for your volume minimizes measurement error. For example, a 25-mL cylinder accurately measures 20 mL but cannot precisely measure 5 mL. Conversely, do not use a 25-mL cylinder four times to measure 100 mL; instead, use a 100-mL graduated cylinder for better accuracy.

기본 유기 화학 기법