끓는점

Boiling occurs when the vapor pressure of a liquid equals atmospheric pressure. As temperature increases, more molecules gain energy to escape the liquid phase, raising vapor pressure. When vapor pressure matches the surrounding atmospheric pressure, bubbles form throughout the liquid, marking the boiling point. This temperature varies by compound and atmospheric conditions.

Stronger intermolecular forces require more thermal energy to overcome, resulting in higher boiling points. Hydrogen bonding is the strongest, followed by dipole-dipole interactions, then London dispersion forces. For example, ethanol boils at 78°C due to hydrogen bonding, while propane boils at -42°C because it lacks this interaction despite similar molecular weight.

Larger molecules with more electrons experience stronger London dispersion forces because their electrons are held more loosely, making them easier for neighboring molecules to polarize. High molecular weight unbranched alkanes have higher boiling points than lower molecular weight alkanes. Additionally, unbranched structures have greater surface area, enabling stronger intermolecular attractions.

In a sealed container, liquid molecules at the surface gain energy and evaporate into the gas phase, while vapor molecules lose energy and condense back to liquid. When these rates become equal, the system reaches equilibrium, and the space above the liquid becomes saturated with vapor. The pressure exerted by this vapor is called vapor pressure, and no net change in liquid or gas amount occurs.

Boiling occurs when vapor pressure equals atmospheric pressure. At higher elevations where atmospheric pressure is lower, liquids boil at lower temperatures because less heat is needed to raise vapor pressure to match the reduced atmospheric pressure. Conversely, at sea level with higher atmospheric pressure, more heat is required to reach the boiling point.

The capillary method uses an inverted empty glass capillary tube inserted into a pure liquid. As the liquid heats, vapor pressure increases, forcing air out and creating bubbles. When cooled, liquid enters the tube once vapor pressure equals atmospheric pressure inside it. The temperature at which liquid enters the capillary marks the boiling point of the compound.

Chloropentane has permanent dipoles enabling dipole-dipole interactions, which are stronger than the London dispersion forces in nonpolar hexane. Although both molecules have similar surface area, the stronger intermolecular forces in chloropentane require more thermal energy to overcome, resulting in a boiling point of 108°C compared to hexane's lower boiling point.