음파: 공명

Resonance occurs when a driving frequency matches an object's natural frequency, causing it to vibrate with significantly higher amplitude. For sound, this happens when a vibrating tuning fork's frequency matches an air column's normal modes. The result is a louder sound produced by the resonating air column.

Boundary conditions determine where nodes and antinodes form in a tube. A tube closed at one end has a node at the closed end and an antinode at the open end, creating anti-symmetrical conditions. A tube open at both ends has antinodes at each end, producing symmetrical boundary conditions that affect which frequencies resonate.

When a tuning fork's frequency matches the air column's natural frequency, the incident sound wave reflects off the tube's closed end and combines with incoming waves. This constructive interference creates standing waves with large amplitudes, amplifying the sound significantly compared to non-resonant frequencies.

A node is a fixed point where air molecules have minimal freedom to oscillate, typically occurring at closed tube ends. An antinode is a point of maximum air displacement, occurring at open tube ends. The arrangement of nodes and antinodes determines which frequencies resonate in the tube.

Tubes open at both ends have symmetrical boundary conditions with antinodes at each end, allowing maximum air displacement at both openings. Tubes closed at one end have anti-symmetrical conditions with a node at the closed end and antinode at the open end. Both configurations produce resonance, but at different frequencies.

Reflected sound waves travel in the opposite direction from incident waves while maintaining the same frequency and wavelength. When incident and reflected waves combine at the correct frequency, they create standing waves with large amplitudes. This constructive combination produces the loud resonant sound characteristic of resonance.

An air column has only specific natural frequencies determined by its length and boundary conditions. Most frequencies interfere destructively and produce minimal vibration. Only frequencies matching the air column's normal modes create standing waves with constructive interference, resulting in resonance at those particular frequencies.