11.13
고막 온도를 평가하려면 고막 온도계(TMT)를 사용합니다. 단계별 가이드는 다음과 같습니다.
다음은 고막 온도계를 사용하여 온도를 평가하기 위한 명확하고 간결한 가이드입니다.
첫 번째 단계는 미생물의 확산을 방지하는 데 도움이 되는 손 위생입니다.
그런 다음 충전 장치에서 온도계를 제거하고 전원을 켭니다.
이제 교차 감염을 피하기 위해 프로브 덮개를 밀어 넣으십시오.
환자에게 머리를 옆으로 기울이고 프로브의 렌즈 덮개를 막을 수 있으므로 외이도에 세루멘이 쌓여 있는지 관찰하도록 지시합니다.
성인의 경우 귓바퀴를 위아래로 당겨 외이도를 곧게 펴십시오. 이 방법은 고막의 노출을 극대화합니다.
주변 온도가 판독값에 영향을 미치지 않도록 프로브를 외이도에 조심스럽게 삽입하여 완벽하게 밀봉하십시오.
그런 다음 스캔 버튼을 누르고 신호음이 완료를 나타낼 때까지 프로브를 제자리에 유지합니다.
환자의 체온이 디스플레이 장치에 나타납니다.
이제 프로브 덮개를 제거하고 버리십시오
환자를 편안한 자세로 돕고, 장비를 교체하고, 손 위생을 수행합니다.
마지막으로 결과를 문서화합니다.
View the full transcript and gain access to JoVE Core videos
Q1: Why is hand hygiene important before assessing tympanic membrane temperature?
Hand hygiene prevents the spread of microorganisms to the patient and reduces cross-infection risk. Performing hand hygiene at the beginning and end of the procedure protects both the patient and healthcare provider, ensuring safe and hygienic temperature assessment throughout the vital signs evaluation.
Q2: How should you position the patient's ear for accurate tympanic membrane temperature measurement?
Instruct the patient to tilt their head to the side for comfort. For adults, gently pull the pinna up and back to straighten the ear canal, then insert the probe angling it toward the patient's jawline. This positioning provides maximum exposure of the tympanic membrane and ensures proper probe placement for accurate readings.
Q3: What should you check before inserting the thermometer probe into the ear canal?
Observe the ear canal for cerumen accumulation, which can obstruct the probe's lens cover and affect measurement accuracy. If cerumen is present, consider switching to the opposite ear. Always ensure the probe cover is in place to prevent cross-contamination before insertion.
Q4: What does the beep sound indicate during tympanic membrane temperature measurement?
The beep sound signals that the temperature measurement is complete. After pressing the scan button and maintaining the probe in position, the audible beep indicates the thermometer has finished reading, and the patient's temperature will appear on the display unit.
Q5: Why is achieving a proper seal important when inserting the thermometer probe?
A proper seal prevents ambient temperature from impacting the readings, ensuring accurate measurement. Carefully insert the probe into the external ear canal to achieve a perfect seal, which allows the thermometer to detect only the patient's tympanic membrane temperature without external environmental interference.
Q6: What steps should you follow after obtaining the temperature reading?
Remove the probe cover and discard it properly to prevent cross-contamination. Assist the patient to a comfortable position, replace the equipment in its charging unit, perform hand hygiene again, and document the findings in the patient's record to ensure accurate record-keeping and continuity of care.
Q7: When should you turn on the thermometer before measuring tympanic membrane temperature?
Turn on the thermometer after removing it from the charging unit and before sliding in the probe cover. Wait until the ready sign appears on the screen to ensure accurate measurement. This preparation step guarantees the device is functioning properly before patient assessment begins.