14.13
혈압(BP)을 평가할 때 의료 전문가는 정확한 판독을 보장하고 적절한 환자 치료를 제공하기 위해 다양한 요인과 잠재적인 예상치 못한 결과를 고려해야 합니다. 가장 신뢰할 수 있는 결과를 얻으려면 이러한 지침을 준수하는 것이 중요합니다.
양쪽 팔 모니터링:
수축기 혈압은…
혈압 또는 혈압 측정 시 다음 측면을 고려하십시오.
초기 평가 중에 양쪽 팔의 혈압을 평가합니다. 수축기 값은 10mmHg만큼 다를 수 있습니다. 후속 평가를 위해 BP 판독값이 더 높은 암을 사용하십시오.
혈압이 높으면 다른 사지를 재평가하여 결과를 비교합니다. 또한 환자의 위치, 커프 크기, 청진기 배치 및 장비의 정확도를 확인하십시오.
안면 홍조, 두통, 비문증 및 피로와 같은 고혈압 증상을 평가합니다.
혈압이 낮으면 혈압 수치를 기준선과 비교하고, 혈압을 낮출 수 있는 활동을 제한하고, 혈액 순환을 증가시키기 위해 환자를 누운 자세로 눕힙니다.
빈맥, 현기증, 창백하거나 청색증 피부와 같은 저혈압의 징후를 평가합니다.
또한 출혈, 고열 및 약물 부작용을 포함하여 저혈압에 기여하는 요인을 평가합니다.
혈압을 얻을 수 없는 경우 다른 사지 또는 촉진 또는 도플러 초음파와 같은 대체 방법을 사용하십시오.
BP를 다시 확인하기 전에 커프가 머리 위로 팔을 30초 동안 들어 올립니다. 그런 다음 커프를 팽창시키고 팔을 지지하면서 부드럽게 내립니다.
View the full transcript and gain access to JoVE Core videos
Q1: Why should blood pressure be measured in both arms during initial assessment?
Measuring blood pressure in both arms during initial assessment allows comparison of systolic values, which may differ by 5-10 mm Hg between arms. For all subsequent assessments, use the arm with the higher reading to ensure consistency and detect potential vascular abnormalities that could affect patient care decisions.
Q2: What should you do if blood pressure readings are abnormally high?
When blood pressure is elevated, reassess in other extremities to compare findings and verify accuracy. Check patient position, cuff size, stethoscope placement, and equipment accuracy. Assess for hypertensive symptoms including facial flush, headache, epistaxis, and fatigue. Document findings and report abnormal results to the care provider.
Q3: How does patient positioning affect blood pressure measurements?
Diastolic pressure is approximately 5 mm Hg higher when measured in a sitting position compared to supine. Systolic pressure is about 8 mm Hg higher in sitting versus supine position. Standardizing patient position ensures accurate, comparable readings and prevents misinterpretation of blood pressure values across assessments.
Q4: What interventions enhance weak or inaudible Korotkoff sounds?
Raise the patient's arm with the cuff overhead for thirty seconds before rechecking blood pressure. Inflate the cuff and gently lower the arm while supporting it. This technique reduces vascular volume and improves blood flow, enhancing Korotkoff sounds for clearer auscultation during assessment blood pressure procedures.
Q5: What is an auscultatory gap and why is it clinically important?
An auscultatory gap is a brief disappearance of Korotkoff sounds between systolic and diastolic pressures during cuff deflation, indicating vascular stiffness. To obtain accurate readings, palpate the radial artery and increase cuff pressure above the disappearance of the pulse before auscultating. Document the auscultatory gap to prevent future measurement errors.
Q6: How should you respond to abnormally low blood pressure readings?
Compare low blood pressure values with the patient's baseline and restrict activities that could lower blood pressure further. Place the patient in a supine position to increase circulation. Assess for hypotension signs including tachycardia, dizziness, and pale or cyanotic skin, and investigate contributing factors like hemorrhage, hyperthermia, or medication side effects.
Q7: When should alternative blood pressure measurement methods be used?
If unable to obtain blood pressure using standard methods, use another extremity or alternative techniques like palpation or assessing blood pressure using a doppler ultrasound. Electronic devices are not advisable for patients with irregular heart rates, tremors, or inability to keep extremities still. Select measurement methods based on individual patient characteristics and clinical presentation.