공초점형광현미경

A confocal laser scanning microscope uses a laser beam and pinholes to section a sample into thin optical slices. The illumination pinhole focuses light on a single point, while the emission pinhole allows only light from the focused focal plane to reach the detector. This blocks out-of-focus light, reducing background fluorescence and blurriness. The laser scans repeatedly at different focal planes to capture optical sections that can be compiled into high-resolution three-dimensional images.

Confocal microscopy blocks out-of-focus light using pinholes, producing high-resolution, sharp contrast images with minimal background noise. Traditional fluorescence microscopes illuminate the entire field at once, resulting in blurry images from unfocused regions. The pinhole system in confocal microscopes eliminates light from non-focused z-planes, enabling clear optical sections and superior image quality for examining thick specimens like biofilms.

Laser scanning confocal microscopy uses a point laser to scan each focal plane across the sample, collecting emitted fluorescence through a pinhole. Spinning disc laser microscopy uses two linked spinning disks with hundreds of pinholes, allowing rapid scanning at different planes and faster image capture. Both generate optical sections that can be stacked to reconstruct three-dimensional images, but spinning disc systems offer significantly faster acquisition speeds.

Confocal microscopy restricts laser excitation to a single point at a given time in a thin section of the sample, rather than illuminating the entire field. This targeted approach means fewer fluorophores are excited simultaneously, resulting in slower loss of fluorescence by photobleaching. The point-scanning strategy preserves fluorescent molecules longer, allowing extended imaging of living specimens without rapid signal degradation.

The illumination pinhole focuses the laser beam to a specific point on the sample, while the emission pinhole is confocal with the illumination plane and focuses emitted light reaching the detector. Together, these pinholes modulate the laser beam to obtain clear, crisp images by eliminating light from non-focused z-planes. This dual-pinhole system is essential for achieving high contrast and reducing background noise in optical sections.

Confocal microscopes capture optical sections at different focal planes along the z-axis as the laser scans the sample repeatedly. Computer software then merges these two-dimensional optical sections from multiple z-planes to reconstruct a high-resolution three-dimensional image, called a z-stack. This process allows visualization of thick specimens like biofilms in three dimensions, revealing internal structures that would be obscured in single focal plane images.

Confocal microscopy is limited by the restricted wavelengths available from laser light sources, whereas traditional fluorescence microscopes offer a wide range of illumination wavelengths using mercury or xenon arc lamps. Early confocal microscopes also produced high-intensity laser damage to cells, though multiphoton microscope systems have largely overcome this issue. These constraints can affect the choice of fluorophores and sample compatibility for certain applications.