커패시터 및 커패시턴스

A parallel plate capacitor consists of two conducting plates separated by a vacuum or insulating material. When connected to a battery, electrons accumulate on one plate, creating a negative charge, while the other plate becomes positively charged. A potential difference develops across the plates until it equals the battery voltage, allowing the capacitor to store electrical charge.

Capacitance is the quantity of charge a capacitor stores per unit of applied voltage. It is measured in farads (F), named after Michael Faraday, where one farad equals one coulomb per volt. Capacitance represents the ratio of maximum charge that can be stored to the applied voltage across the capacitor's plates.

Capacitance is directly proportional to the surface area of the parallel plates and inversely proportional to the distance between them. Increasing plate area increases the charge storage capacity, while decreasing the distance between plates strengthens the attraction of opposite charges, thereby increasing capacitance.

When a charged capacitor connects to a load, it discharges as electrons flow in the reverse direction through the circuit. The potential difference across the plates decreases until it reaches zero, releasing the stored electrical energy to power the connected device.

The electric field between parallel plates is directly proportional to both the charge stored and the surface charge density on the plates. Since surface charge density equals charge per unit area, the electric field magnitude increases with greater charge accumulation on the capacitor plates.

A dielectric is an insulating material placed between capacitor plates to replace vacuum. Dielectrics enhance capacitance by allowing closer plate spacing and improving charge storage efficiency. Understanding dielectric properties like susceptibility, permittivity and dielectric constant helps optimize capacitor performance for specific applications.

Capacitors have diverse applications including filtering static from radio reception and storing energy in medical devices like heart defibrillators. Solar lights use capacitors to store daytime electrical charge and release it at night, demonstrating how capacitors enable energy storage across many technological systems.