등가 용량

Identify and group capacitors connected in series separately from those in parallel. Calculate the equivalent capacitance for each group using the appropriate formula: sum reciprocals for series, sum values for parallel. Replace each group with its equivalent capacitor, then repeat until a single equivalent capacitance remains. This step-by-step reduction simplifies complex networks into manageable calculations.

In a series circuit, capacitors are connected end-to-end with no branching paths. Charge cannot accumulate at intermediate points, so the same charge magnitude flows through each capacitor. The applied potential difference distributes across capacitors inversely proportional to their capacitances, but the charge stored on each remains equal.

In a parallel combination, the equivalent capacitance equals the sum of all individual capacitances. This means the equivalent capacitance is always greater than any single capacitor in the network. Parallel capacitors share the same potential difference, allowing their charges to add together for increased total storage capacity.

The equivalent capacitance in a series circuit is always smaller than the smallest individual capacitance in the network. This occurs because the reciprocals of capacitances add together, reducing the overall ability to store charge. Series combinations are useful when lower capacitance values are needed or when voltage distribution is important.

For series capacitors, the reciprocal of equivalent capacitance equals the sum of reciprocals of individual capacitances: 1/Ceq = 1/C1 + 1/C2 + 1/C3. This relationship reflects how series connections restrict charge flow and reduce overall capacitance compared to parallel arrangements.

Calculate the charge on each parallel capacitor using Q = CV, where V is the common voltage across all parallel capacitors and C is the individual capacitance. Since all parallel capacitors experience the same potential difference, multiply each capacitance by this voltage to find its stored charge.

The total applied voltage distributes across series capacitors such that the sum of individual voltages equals the battery voltage. Each capacitor's voltage is inversely proportional to its capacitance: higher capacitance receives lower voltage. This voltage division is essential for protecting sensitive components in circuits.