드리프트 속도

Drift velocity is the average velocity of free-charged particles in a material due to an electric field. It is calculated as the ratio of current to the product of charge carrier concentration, individual charge magnitude, and conductor cross-sectional area. Despite random electron motion, an applied electric field causes charges to gradually drift opposite to the field direction, enabling electrical current flow.

Electrons carry negative charge, so they drift opposite to the applied electric field direction. Conventional current is defined as positive charge flow, which is opposite to actual electron motion in metallic conductors. The negative sign in drift velocity calculations indicates this directional reversal between electron movement and conventional current direction.

In metals, free electrons travel in nearly random paths due to collisions with atoms and other electrons, similar to gas molecule motion. An electrical field causes these randomly moving electrons to drift gradually in the opposite direction. The theory of metallic conduction describes how this collective drift of many free electrons produces measurable electrical current despite individual electron paths appearing chaotic.

Drift velocity is typically around 10⁻⁴ m/s because conductors contain enormous numbers of free charge carriers. Electrical signals propagate rapidly through the conductor as a propagating change in the electrical field, moving at nearly light speed. This fast signal transmission occurs through electromagnetic field effects, not through individual electron movement, which remains very slow.

In metals, free electrons serve as charge carriers and move opposite to the electric field. In ionized gases (plasma), both electrons and positively charged ions carry current. In semiconductors like silicon, conduction occurs through electrons and holes, which are vacancy sites acting as positive charges. Regardless of carrier type, conventional current always points in the positive charge direction.

Drift velocity equals the current divided by the product of charge carrier concentration, charge magnitude per particle, and conductor cross-sectional area. For example, in a copper wire, first determine the free electron density from copper's atomic structure, then calculate the wire's cross-sectional area. Substituting these values into the drift velocity formula yields the average electron drift speed in meters per second.

The electrical field does work moving electrons over distance, but this work does not increase electron kinetic energy. Instead, energy transferred by the field is dissipated through collisions between electrons and conductor atoms. This energy transfer heats the conductor and is the basis for electrical resistance and power dissipation in circuits.