Question 1

Why is average power more practical than instantaneous power in AC circuits?

Accepted Answer

Instantaneous power in AC circuits constantly fluctuates with the sinusoidal waveform, making it challenging to measure. Average power, calculated as the time average of instantaneous power over one complete cycle, provides a practical and mathematically simpler value. This approach is more useful for understanding actual energy consumption in circuits with time-dependent voltage and current.

Question 2

What is the power factor and how does it affect AC circuit power?

Accepted Answer

The power factor, represented as cos ϕ, indicates how much the delivered power is reduced from the theoretical maximum due to voltage and current being out of phase. It ranges from zero to one, with reactive components like capacitors and inductors having a power factor of zero, meaning they dissipate no average power. In resistive circuits, the power factor equals one since voltage and current are in phase.

Question 3

How does a resistor dissipate power differently than a capacitor in an AC circuit?

Accepted Answer

In a resistor, voltage and current are in phase, resulting in continuous power dissipation calculated using root mean square values. In a capacitor, the power factor is zero, so average power dissipated is zero. Instead, a capacitor stores energy during part of the cycle and returns it to the supply during another part, with no net energy loss.

Question 4

How does an inductor behave regarding power in an AC circuit?

Accepted Answer

Like a capacitor, an inductor has a power factor of zero, meaning it dissipates zero average power. Instead, an inductor stores energy in its magnetic field during part of the cycle and returns it to the circuit during another part. This energy exchange occurs without net power consumption, making inductors reactive rather than resistive elements.

Question 5

How is average power calculated in an RLC circuit?

Accepted Answer

In an RLC circuit, average power depends on the phase angle between voltage and current at the AC source. By recalling the phase angle from the phasor diagram and substituting root mean square values of voltage and current, along with the power factor cos ϕ, the average power can be determined. The AC source either produces or absorbs power depending on this phase relationship.

Question 6

What is the difference between DC and AC circuit power calculations?

Accepted Answer

In DC circuits, power is simply voltage times current with constant values. In AC circuits, power calculations are more complex because voltage and current are sinusoidal and time-dependent. AC circuits with reactive components store and return energy cyclically, requiring average power calculations over complete cycles rather than simple instantaneous multiplication.

Question 7

How do you determine average power using root mean square values?

Accepted Answer

Average power is calculated by substituting root mean square values of voltage and current into the power equation, multiplied by the power factor cos ϕ. This method simplifies calculations by using effective DC-equivalent values rather than instantaneous values. For resistors specifically, the rms value in ac circuit analysis provides straightforward power dissipation results.

AC 회로의 전원