Question 1

What is mechanical efficiency and how is it calculated?

Accepted Answer

Mechanical efficiency is the ratio of output work to input work, indicating how effectively a machine converts energy. For an ideal machine with no friction, efficiency equals one, meaning input and output work are equal. In real machines, friction reduces efficiency. The efficiency is calculated by dividing the output work (input work minus frictional work) by the total input work applied to the machine.

Question 2

How does friction affect a machine's mechanical efficiency?

Accepted Answer

Friction is the primary source of energy loss in real machines, reducing mechanical efficiency below the ideal value of one. The frictional force depends on the normal reaction force and the coefficient of friction. As the coefficient of friction increases, efficiency decreases. When the toggle angle equals the friction angle, efficiency becomes zero, and for angles less than the friction angle, efficiency becomes negative, making the machine ineffective.

Question 3

Why should a toggle vise only be used above the friction angle?

Accepted Answer

A toggle vise should only operate when its angle exceeds the friction angle because the net reaction force becomes zero or negative at or below this critical angle. When efficiency is zero or negative, the vise cannot effectively compress the workpiece. Using the vise above the friction angle ensures positive efficiency and reliable compression of wooden blocks or other materials.

Question 4

How is output work determined in a real machine using virtual work?

Accepted Answer

The principle of virtual work calculates output work by evaluating the total virtual work of all contributing forces during virtual displacement. For a real machine like a toggle vise, output work equals input work minus the work done by frictional force. This approach accounts for energy losses and provides the actual mechanical efficiency by dividing output work by input work.

Question 5

What is the difference between an ideal machine and a real machine?

Accepted Answer

An ideal machine has no energy losses and achieves an efficiency of one, where input work equals output work. Real machines experience friction and other energy losses, resulting in efficiency less than one. In a toggle vise, the ideal case has no frictional force, while the real case includes friction from the sliding block against the horizontal plane, reducing overall efficiency.

Question 6

How do you calculate the normal reaction and frictional force in a toggle vise?

Accepted Answer

The normal reaction force is calculated first from the geometry and applied forces of the toggle vise. The frictional force is then obtained by multiplying the normal reaction force by the coefficient of friction. These values are essential for determining total virtual work and ultimately calculating the mechanical efficiency using the principle of virtual work.

Question 7

What happens to efficiency when the coefficient of friction changes?

Accepted Answer

Mechanical efficiency is inversely related to the coefficient of friction. A lower coefficient of friction results in efficiency closer to one, approaching ideal performance. Conversely, a higher coefficient of friction significantly reduces efficiency. The relationship between these variables determines whether a machine like a toggle vise can function effectively at a given operating angle.

실제기계의 기계적 효율성에 관한 연구