자료: 불확실성: 개요

Uncertainty reflects the possible range of values in which a measurement result can exist, while error is the difference between the measured result and the true value. Uncertainty represents the collective difference between repeated measurements and the expected value, accounting for random variations that occur despite careful experimental technique.

Significant figures represent the number of digits required to express a measurement outcome without loss of precision. Uncertainty is placed to the right of the result's magnitude and expressed using significant figures, which include all digits of certainty plus the digits of uncertainty on the right side.

Absolute uncertainty is the possible margin of variation for a measurement result in both directions. It is conventionally written after the estimated or expected value, expressed as addition or subtraction to the significant figure, indicating the magnitude of possible variations in either direction from the central value.

Relative uncertainty is the ratio of absolute uncertainty to the magnitude of the result, providing a proportional measure of uncertainty. While absolute uncertainty expresses the margin of variation in the same units as the measurement, relative uncertainty is dimensionless and allows comparison of precision across measurements of different magnitudes.

Repeated measurements produce different results due to random errors, which are indeterminate variations that occur despite careful experimental technique. These random errors cause observed values to differ from the expected value, creating the collective difference known as uncertainty that must be quantified and reported.

Uncertainty can be minimized through repetitive measurements to detect and reduce inaccuracies caused by both determinate and indeterminate errors. Proper experimental design, careful technique, and statistical analysis of multiple measurements help identify and minimize the random errors that contribute to overall measurement uncertainty.

Uncertainty establishes the confidence range around measured values, which is essential when comparing experimental results. Understanding whether differences between measurements fall within acceptable uncertainty ranges helps determine if variations are meaningful or simply reflect random error, informing decisions about data validity and experimental success.