Question 1

What is potentiometry and how does it measure analyte concentration?

Accepted Answer

Potentiometry measures the potential difference between two electrodes in an electrochemical cell without drawing significant current that would alter the solution's composition. An indicator electrode exchanges electrons with the analyte, while a reference electrode maintains constant potential. The cell potential difference between these electrodes, combined with the Nernst equation, allows estimation of analyte concentration while accounting for temperature dependency and matrix effects.

Question 2

What role does the salt bridge play in a potentiometric cell?

Accepted Answer

The salt bridge connects the two half-cells and is typically filled with an inert electrolyte. It prevents short-circuiting and mixing of solutions while allowing ion flow to maintain electrical neutrality. The salt bridge is essential for maintaining stable cell potential and accurate measurements in potentiometric analysis.

Question 3

How are the reference and indicator electrodes positioned in a potentiometric setup?

Accepted Answer

Conventionally, the reference electrode serves as the anode or left-hand electrode, where oxidation occurs and electrons are lost. The indicator electrode acts as the cathode or right-hand electrode, where reduction occurs and electrons are gained. This arrangement allows the cell potential to be calculated from the difference between reduction potentials at each electrode.

Question 4

What is liquid junction potential and why must it be considered in potentiometry?

Accepted Answer

Liquid junction potential develops at interfaces between dissimilar electrolyte solutions in the electrochemical cell. For accurate measurements, this potential must be included in the overall cell potential calculation. Effects can be reduced by maintaining balanced ion mobilities and high salt concentrations in the salt bridge.

Question 5

How does the indicator electrode differ from the reference electrode in function?

Accepted Answer

The indicator electrode actively exchanges electrons with the analyte solution, responding to changes in analyte concentration and potential. The reference electrode maintains a constant, known potential independent of the analyte. This contrast allows the indicator electrode's potential change to reflect analyte properties while the reference provides a stable baseline for measurement.

Question 6

Why is it important that potentiometry draws minimal current during measurement?

Accepted Answer

Drawing significant current would cause electrochemical reactions that alter the solution's composition, compromising measurement accuracy. By maintaining minimal current flow, potentiometry preserves the analyte's original state and ensures that measured potential differences reflect true equilibrium conditions rather than non-equilibrium electrochemical changes.

Question 7

How does potentiometry relate to other electrochemical analysis methods?

Accepted Answer

Potentiometry measures potential without significant current flow, distinguishing it from techniques like controlled potential coulometry electrolytic methods that apply specific potentials to drive reactions. This fundamental difference makes potentiometry ideal for non-destructive analyte concentration determination, while other electrochemical methods serve different analytical purposes.

전위차법: 개요

Browse More Videos