전착

Electrodeposition separates metal ions by applying an electric current to an electrolytic cell containing a cathode and anode. Metal ions undergo reduction at the cathode and deposit onto its surface, while oxidation occurs at the anode. Metals with different reduction potentials, such as copper and nickel, can be selectively separated by controlling solution pH and deposition conditions.

Electrodes provide the surface where metal ions deposit during electrodeposition. Platinum gauze electrodes are commonly used because their large surface area facilitates efficient deposition. The cathode, where reduction occurs, accumulates metal deposits, while the anode, where oxidation occurs, may also accumulate oxidized species depending on the ions present in solution.

pH adjustment controls which metal deposits first by exploiting differences in reduction potentials. In acidic conditions, water oxidizes at the anode while copper deposits at the cathode. After copper removal and weighing, the solution is made basic to deposit nickel on the same electrode, enabling sequential separation of both metals from a single sample.

Some ion pairs deposit on opposite electrodes due to their electrochemical properties. For example, copper(II) ions undergo reduction and deposit as copper metal on the cathode, while lead(II) ions undergo oxidation and deposit as lead dioxide on the anode in nitric acid solution. This simultaneous deposition on different electrodes allows quantitative separation of both analytes.

Electrodeposition results depend on electrode potential, electrode size, deposition time, and stirring rate. These parameters control the efficiency and completeness of metal ion deposition. Optimizing these variables ensures accurate quantitative analysis by maximizing deposition yield and minimizing interference from competing reactions.

In electrodeposition, reduction occurs at the cathode, where metal ions gain electrons and deposit as solid metal. Oxidation occurs at the anode, where species lose electrons. In acidic solutions, water molecules oxidize at the anode, while metal cations reduce at the cathode, enabling selective metal separation based on reduction potential differences.

Electrodeposition is an electrochemical separation technique that differs from physical methods like extraction or precipitation. Unlike extraction, which relies on partition and distribution coefficients between phases, electrodeposition uses electrical potential to drive selective ion deposition. This makes it particularly effective for separating metals with significantly different reduction potentials.