Question 1

What is the difference between TC and TD markings on volumetric glassware?

Accepted Answer

TC (to contain) markings indicate the glassware is calibrated to hold an accurate volume at a specified temperature, accounting for glass expansion. TD (to deliver) markings, found on pipettes, indicate the glassware delivers a specific volume after accounting for film drainage on glass walls. This distinction ensures accurate measurements for different laboratory applications.

Question 2

How do you properly calibrate a volumetric flask?

Accepted Answer

Fill the flask with distilled water until the meniscus aligns with the calibration mark at eye level. If water exceeds the line, drain carefully; if below, add water dropwise until it reaches the mark. Calibration is performed at a specific temperature, typically 20°C, to account for temperature effects on volume.

Question 3

Why is meniscus reading important when using volumetric pipettes?

Accepted Answer

The meniscus is the curved surface of liquid in glassware. Viewing it at eye level ensures accurate volume readings because the bottom of the meniscus indicates the true liquid level. Proper meniscus alignment is critical for volumetric pipettes to deliver single volumes accurately to four or five significant figures.

Question 4

What is the accuracy difference between volumetric and graduated pipettes?

Accepted Answer

Volumetric pipettes deliver a single, highly accurate volume to four or five significant figures. Graduated pipettes have multiple calibration marks and can deliver different volumes but with lower accuracy of up to three significant figures. Choose volumetric pipettes when maximum precision is required.

Question 5

How does a burette control the flow of titrant during analysis?

Accepted Answer

A burette is a graduated glass tube with a stopcock or manual valve at the bottom that controls liquid flow. The valve allows precise regulation of titrant dispensing for accurate volume measurement. The reservoir contains markings to indicate the volume of liquid, enabling careful tracking of dispensed amounts during titrations.

Question 6

How can you verify that calibrated glassware delivers the correct volume?

Accepted Answer

After calibration, weigh the water delivered by the glassware and compare it with the theoretical volume based on water density. This gravimetric method confirms accuracy for volumetric flasks, pipettes, and burettes. Discrepancies indicate the need for recalibration or replacement of the equipment.

Question 7

Why is glassware calibration essential for analytical chemistry work?

Accepted Answer

Accurate calibration ensures precise volume measurements, which are crucial for solution-based analyses and maintaining consistency across measurements. Proper calibration prevents errors from inaccurate volumes and supports sample preparation for analysis. This reliability is fundamental to obtaining valid analytical results and maintaining laboratory integrity.

유리 기구 교정

Browse More Videos