고성능 액체 크로마토그래피: 용출 공정

Degassing removes dissolved gases like nitrogen and oxygen from solvents before they enter the HPLC system. These gases interfere with sample detection, distort chromatogram peaks, and reduce sensitivity. Degassing is performed using vacuum pumps or helium purging to maintain separation and detection integrity throughout the analysis.

A reciprocating pump uses a small piston with two one-way check valves to deliver mobile phase. During the backward stroke, solvent flows through the inlet valve; during the forward stroke, it is pumped out through the outlet valve. Although widely used, reciprocating pumps produce pulsed solvent flow, which modern systems address with pulse dampers.

Isocratic elution uses a single, constant mobile phase composition throughout separation, while gradient elution varies the mobile phase composition during analysis. Gradient elution improves separation efficiency, reduces analysis time, enhances resolution, and produces sharper peaks, making it superior for complex mixtures compared to isocratic elution.

A loop injector uses a two-position valve to introduce fixed-volume samples into the flowing mobile phase. Sampling loops contain interchangeable volumes ranging from 0.5 microliters to 2 milliliters. The valve directs the mobile phase to carry the sample into the column under high pressure, unlike gas chromatography sample injection systems.

Solvent reservoirs store multiple solvents that enable variation of mobile phase composition and polarity during analysis. Before pumping, solvents are filtered and degassed to remove impurities and dissolved gases. This setup allows independent control of mobile phase properties, which is essential for both isocratic and gradient elution methods.

HPLC-grade solvents are highly pure to minimize interference from impurities and contaminants. Even trace amounts can interfere with the elution process, distort chromatogram peaks, and reduce detection sensitivity. High-quality solvents ensure reliable separation and accurate quantification of analytes in complex samples.

Independent binary pumps connected to a mixing chamber regulate both the flow rate and polarity of the mobile phase during gradient elution. This dual-pump system allows precise, programmable changes in solvent composition throughout the separation, improving resolution and analysis efficiency compared to fixed single-solvent approaches.