1.11
전류 분배기
병렬 전기 연결에서 저항은 동일한 노드 쌍 사이에 연결되어 각 저항에 동일한 전압을 생성합니다. Kirchhoff의 전류 법칙은 이러한 연결에 적용되어 이러한 저항기를 통과하는 전류의 합이 소스 전류와 동일하다는 것을 입증합니다. 옴의 법칙을 활용하여 소스 전류는 소스…
In a parallel connection, resistors are connected between the same pair of nodes, creating an equal voltage across each.
Considering the schematic circuit and applying Kirchhoff's current law, the sum of the currents through these resistors equals the source current.
Using Ohm's law, the source current equals the source voltage multiplied by the sum of the reciprocals of the individual resistances.
Solving for the source voltage and substituting it into Ohm's law gives the current passing through each resistor.
The source current is divided among the resistors in an inverse proportion to their resistances, demonstrating the principle of current division in a current divider circuit.
A combination of parallel resistors can be treated as a single equivalent resistor with resistance equal to the product of their individual resistances divided by their sum.
Conductance, the inverse of resistance, can be calculated for series and parallel connections.
In series, the equivalent conductance is the product of the individual conductances divided by their sum, while in parallel, it is the sum of the individual conductances.
View the full transcript and gain access to JoVE Core videos
Q1: How does current divide among parallel resistors?
In a parallel circuit, source current distributes among resistors in inverse proportion to their resistances. Using Kirchhoff's current law, the sum of individual currents equals the source current. A resistor with lower resistance receives more current, while higher resistance receives less. This current division principle is fundamental to analyzing parallel circuits and predicting current flow through each branch.
Q2: What is the relationship between voltage and current in parallel resistors?
In parallel connections, all resistors experience the same voltage across their terminals. Using Ohm's law, the current through each resistor is determined by dividing this equal voltage by the individual resistance value. This equal voltage distribution is a defining characteristic of parallel circuits and enables straightforward current calculations for each branch.
Q3: How do you calculate equivalent resistance for parallel resistors?
The equivalent resistance of parallel resistors is found by taking the reciprocal of the sum of individual reciprocals. For two resistors, multiply their values and divide by their sum. This equivalent resistance represents a single resistor that could replace the parallel combination while maintaining the same current-voltage characteristics in the circuit.
Q4: What is conductance and how does it simplify parallel circuit analysis?
Conductance is the reciprocal of resistance and provides a convenient parameter for analyzing circuits. In parallel configurations, the equivalent conductance equals the sum of individual conductances, mirroring how resistances add in series. This approach simplifies calculations when working with multiple parallel resistors by avoiding complex reciprocal operations.
Q5: How does equivalent conductance differ between series and parallel connections?
In series resistors, equivalent conductance is calculated as the product of individual conductances divided by their sum. In parallel resistors, equivalent conductance is simply the sum of individual conductances. This difference reflects the inverse relationship between how resistances and conductances combine in series versus parallel arrangements.
Q6: Why is current division important in circuit design and analysis?
Current division allows engineers to predict how current distributes across parallel branches without analyzing the entire circuit. This principle simplifies complex network analysis by enabling quick calculations of individual branch currents. Understanding current division is essential for designing circuits with specific current requirements and for troubleshooting parallel circuit configurations.
Q7: How does simplifying parallel resistor networks preserve circuit behavior?
Replacing multiple parallel resistors with their equivalent resistance maintains the same current-voltage characteristics at the circuit terminals. This simplification reduces circuit complexity while preserving the original network's response to voltage and current inputs. Engineers use this technique to analyze and design electrical circuits more efficiently without altering the circuit's fundamental behavior.