선형 회로

A circuit is linear when its output has direct proportionality to its input, satisfying homogeneity and additivity properties. Homogeneity means scaling the input by a constant factor scales the output by the same factor. Additivity means the response to combined inputs equals the sum of individual responses. Linear circuits contain only linear elements and independent sources.

Homogeneity dictates that multiplying current by constant k scales voltage by k times. Additivity ensures circuit behavior remains consistent when multiple inputs combine. Together, these properties enable predictive modeling: when load voltage changes, new source current can be found by multiplying a constant with the old current and substituting known values.

A resistor satisfies both homogeneity and additivity properties in its voltage-current relationship. When voltage increases, current increases proportionally; when voltage is scaled by a factor, current scales identically. This consistent linear behavior across all operating conditions makes resistors fundamental building blocks of linear circuits.

Linear circuits exhibit a direct linear relationship between voltage and current. Graphical representation reveals this proportionality: as voltage increases, corresponding current increases at a constant rate. This predictable voltage-current behavior allows engineers to model circuits accurately and predict responses to changing electrical conditions.

Linearity does not apply to power calculations because power depends on the square of current or voltage. Since power is a quadratic function, it exhibits nonlinearity. Doubling current quadruples power, not doubles it. This nonlinear behavior means superposition theorem and other linear analysis methods cannot be directly applied to power.

Linearity enables predictive modeling by establishing constant relationships between circuit parameters. Initially, current through load resistor and voltage drops are determined using KCL. When load voltage changes, the new source current is calculated by multiplying a constant with the old current, demonstrating how linear relationships simplify circuit analysis.

Linear circuits exclusively comprise linear elements, linear dependent sources, and independent sources. Linear elements like resistors satisfy homogeneity and additivity properties. These components work together to maintain the circuit's linear input-output relationship, enabling the use of superposition theorem and other linear analysis techniques.