주요 스트레스

The circle graphically depicts the relationship between normal and shearing stresses across different angular orientations. Its center represents the average normal stress, while its radius indicates the range of stress variations. This geometric representation, known as Mohr circle for plane stress, allows engineers to visualize how stresses transform as the plane orientation changes.

Principal stresses occur at points A and B where the circle intersects the horizontal axis, representing the maximum and minimum normal stresses with zero shearing stress. These intersection points define the principal planes of stress, where only normal stress exists. The principal plane carrying maximum or minimum normal stress is identified by substituting the angular parameter into the normal stress equation.

Maximum and minimum normal stresses are determined by adding or subtracting the circle's radius to or from the average normal stress at the circle's center. The radius represents the spread of stress values, while the center value is the mean stress. This calculation provides the extreme normal stress values that materials experience under the given loading conditions.

Maximum shearing stress occurs at points along the circle's vertical diameter, where the normal stress equals the average stress. This condition produces two orientations, each 90 degrees apart, that predict peak shearing stress locations. The magnitude of maximum shearing stress equals the circle's radius.

The planes experiencing maximum shearing stress and the principal stress planes are oriented 45 degrees apart. This geometric relationship is fundamental to understanding stress distribution, as it reveals how normal and shearing stresses interact. This 45-degree offset is a key characteristic observed in stress transformations.

The principal plane experiencing maximum or minimum normal stress is identified by substituting the angular parameter into the normal stress equation. This calculation determines the specific orientation angle at which each principal stress acts. The result indicates whether that plane corresponds to the maximum or minimum stress value from the circle's intersection points.

Principal stresses represent the extreme normal stresses a material experiences, which are critical for predicting failure and material behavior. Materials fail when stresses exceed their strength limits, making principal stress identification essential for design and safety analysis. This understanding connects directly to yield criteria for ductile materials under plane stress and other failure prediction methods.