Question 1

Why has aluminum replaced copper in overhead transmission lines?

Accepted Answer

Aluminum has largely replaced copper due to its abundance and cost-effectiveness. The most common type is the steel-reinforced aluminum conductor (ACSR), which combines aluminum strands around a steel core for strength and conductivity. This design balances electrical performance with economic efficiency, making it the preferred choice for modern transmission systems.

Question 2

What types of aluminum conductors are used in transmission line design?

Accepted Answer

Transmission lines use several aluminum conductor variants: all-aluminum conductors (AAC), all-aluminum alloy conductors (AAAC), aluminum conductor alloy-reinforced (ACAR), and aluminum-clad steel conductors. Advanced designs like gap-type ZT-aluminum conductors can operate above 150°C. Each type offers different thermal and mechanical properties suited to specific operating conditions and environmental requirements.

Question 3

How do shield wires protect transmission lines from lightning?

Accepted Answer

Shield wires intercept lightning strikes before they reach the main conductors, reducing tower footing resistance and protecting the transmission line infrastructure. Made from high-strength steel or Alumoweld, these wires are strategically placed and properly grounded to safely dissipate electrical energy from lightning events, ensuring system reliability and safety.

Question 4

What role do insulators play in transmission line electrical design?

Accepted Answer

Insulators provide electrical isolation between conductors and support structures. Transmission lines above 69 kV use suspension-type insulators made of porcelain, toughened glass, or polymer discs. Insulator discs ensure adequate insulation and voltage gradient control, minimizing energy losses while maintaining safety and preventing unwanted current paths to ground.

Question 5

How do support structures differ based on transmission line voltage levels?

Accepted Answer

Support structures vary with voltage requirements. High-voltage transmission lines use self-supporting lattice steel towers that provide strength and stability for heavy conductor loads. Lower-voltage applications use wooden frames, which are more cost-effective. The mechanical design ensures structural durability while considering environmental factors like land use and visual impact.

Question 6

What electrical factors must be considered when designing a transmission line?

Accepted Answer

Electrical design involves conductor type and size, bundle number per phase, and thermal capacity. Voltage gradient control is essential for minimizing energy losses. Proper clearance and line insulation prevent safety hazards. Designers must balance technical performance with installation costs and operational losses to achieve an optimal line design meeting all criteria.

Question 7

Why is thermal capacity important in transmission line conductor selection?

Accepted Answer

Thermal capacity determines how much current a conductor can safely carry without overheating. Advanced aluminum conductors with steel support and gap-type ZT-aluminum designs can operate above 150°C, allowing higher power transmission. Selecting conductors with appropriate thermal ratings ensures reliable operation under peak demand while preventing insulation degradation and mechanical failure.

송전선 설계 고려 사항

Browse More Videos