과전류 릴레이

Instantaneous overcurrent relays trip immediately when input current exceeds the pickup current, instantly energizing the circuit breaker trip coil for rapid fault response. Time-delay overcurrent relays include an intentional delay dependent on current magnitude, allowing minor surges to pass while responding quickly to larger faults. This selective response protects circuits while minimizing unnecessary trips.

An electromechanical time-delay relay uses a conducting aluminum disc rotating within a magnetic field generated by input current. The disc's rotational speed is proportional to current magnitude, causing relay contacts to close faster with larger currents. This mechanism enables adjustable protection tailored to varying fault conditions in power systems.

Overcurrent relays are configured using current tap and time dial settings. The current tap adjusts the pickup current threshold, while the time dial controls the delay duration. Selection of these settings depends on system characteristics including sources, lines, and loads to ensure appropriate protection.

Overcurrent relays connect to the secondary current of a current transformer to safely measure and monitor circuit currents. This connection enables the relay to detect overcurrent conditions and respond appropriately by energizing the circuit breaker trip coil. Instrument transformers provide isolation and current scaling for reliable relay operation.

Time-delay relays permit minor current surges to pass without tripping but respond swiftly to significant faults. Instantaneous relays trip immediately at any overcurrent above the pickup threshold. Different relays operate faster on higher fault currents, allowing selective protection that distinguishes between normal transients and serious faults requiring immediate action.

Overcurrent relays are crucial for protecting circuits by detecting fault-induced current surges and triggering circuit breaker trips. They maintain system stability and prevent equipment damage by effectively managing fault currents. Their rapid or delayed response, depending on relay type, ensures safe and reliable operation of power systems under varying fault conditions.

Pickup current is the pre-set threshold above which an overcurrent relay activates. Instantaneous relays trip immediately when input current exceeds this value, while time-delay relays begin their intentional delay at this point. The pickup current setting is adjusted via the current tap to match system requirements and protect against genuine faults.