Question 1

What does cement fineness measure?

Accepted Answer

Cement fineness is the total surface area of cement particles per unit weight of cement, typically expressed in square meters per kilogram. It indicates the proportion of particles of varying sizes within the cement. A steep size distribution curve shows a significant portion of fine particles, with approximately 90 percent of cement particles smaller than 2.36 mils.

Question 2

How does cement fineness affect hydration rate?

Accepted Answer

Hydration of cement initiates at the surface of cement particles, so finer cement with greater surface area undergoes faster hydration and strength development. The increased surface area available for water interaction accelerates the chemical reactions that bind cement particles together, directly influencing the rate at which concrete gains strength and heat of hydration.

Question 3

What is the Blaine air permeability test used for?

Accepted Answer

The Blaine air permeability test determines the specific surface area of cement by measuring the time required for a definite volume of air to pass through a cement bed at constant rate. Cement is packed at specific density in a cell, a partial vacuum is created, and the air flow time is recorded to calculate the cement's specific surface area.

Question 4

How is cement fineness determined using dry sieving?

Accepted Answer

Dry sieving involves passing a definite mass of cement through a 45-micron sieve and measuring the weight of residue retained on the sieve. This method provides a direct measurement of fineness by quantifying the proportion of particles larger than 45 microns, indicating the overall particle size distribution of the cement sample.

Question 5

Why is cement fineness important for concrete properties?

Accepted Answer

Cement fineness directly influences concrete workability, gypsum requirement, and long-term behavior. Finer cement particles increase surface area available for hydration, affecting how quickly the concrete sets and develops strength. This property is vital for controlling concrete performance and ensuring desired durability and structural characteristics.

Question 6

What alternative methods measure cement fineness besides air permeability?

Accepted Answer

Direct measurement methods include sedimentation and elutriation, which use Stokes' law to find terminal velocity of spherical particles in fluid. The Wagner turbidimeter estimates particle concentration in suspension and measures surface area through light transmission. The Lea and Nurse method measures pressure drop of air flowing through a cement bed to determine specific surface area.

Question 7

How does particle size distribution relate to cement fineness?

Accepted Answer

The size distribution curve of cement indicates fineness by showing the proportion of particles at varying sizes. A steep curve indicates a significant portion of fine particles, meaning higher fineness. Since approximately 90 percent of cement particles are smaller than 2.36 mils in typical cement, the distribution directly reflects the total surface area available for hydration.

시멘트의 분말도