설계 사례: 바람에 노출된 디스크의 안전 직경 계산

Drag force is calculated using the formula: Drag Force = 0.5 × air density × velocity squared × drag coefficient × projected area. For the 4-meter disc example, with air density of 1.25 kg/m³, wind velocity of 25 m/s, and drag coefficient of 1.1, the resulting drag force exceeded the wall member's 3,250 Newton capacity, indicating an unsafe condition requiring design adjustment.

Drag force is directly proportional to the projected surface area of an object. Since a circular disc's area increases with the square of its diameter, reducing diameter from 4 to 3 meters significantly decreases the exposed area and consequently reduces drag force. This adjustment brought the wind force within the wall mounting's safe reaction force capacity of 3,250 Newtons.

The drag coefficient measures the aerodynamic resistance an object experiences in a fluid such as air, quantifying how efficiently wind flows around the object's shape. In this design example, the disc's drag coefficient of 1.1 directly multiplies the calculated wind pressure to determine total drag force, making it a critical parameter in assessing structural safety for wind-exposed installations.

Engineers must verify that external forces, such as wind drag, do not exceed the structural capacity of supporting members. When the initial 4-meter disc design produced unsafe drag forces, the engineer recalculated using the drag force equation to determine a maximum safe diameter. Reducing to 3 meters maintained the aesthetic feature while ensuring the wall mounting could safely withstand wind loads.

Safety depends on comparing calculated drag force against the wall member's maximum reaction force capacity. Key factors include air density, wind velocity, disc diameter, and drag coefficient. In this example, the 4-meter disc with 25 m/s wind velocity and 1.1 drag coefficient produced drag force exceeding 3,250 Newtons, necessitating diameter reduction to achieve safe design conditions.

Drag force increases with the square of wind velocity in the drag force equation. At 25 m/s, the wind velocity squared contributes significantly to the total drag force calculation. This quadratic relationship means even small increases in wind speed produce substantial increases in drag force, emphasizing why velocity is a critical parameter in external flow conditions affecting structural design.

Air density directly multiplies into the drag force calculation, affecting the magnitude of wind pressure on exposed surfaces. In this design example, air density of 1.25 kg/m³ combined with 25 m/s velocity and the disc's projected area to produce the total drag force. Changes in altitude or atmospheric conditions that alter air density would proportionally change the drag force and structural safety requirements.