Question 1

Why is viscosity-average molar mass more useful than number-average molar mass for polymers in solution?

Accepted Answer

Viscosity-average molar mass accounts for how larger polymer chains contribute more strongly to flow resistance in solution. Larger macromolecules occupy greater hydrodynamic volume and create more significant disturbances in solvent flow, making this measure better reflect actual polymer behavior than simpler averages that treat all chains equally.

Question 2

What does the Mark–Houwink equation tell us about polymer structure?

Accepted Answer

The Mark–Houwink equation relates intrinsic viscosity to molar mass using two constants: K reflects polymer–solvent interactions, while the exponent 'a' describes chain conformation. Values near 0.5 indicate flexible coils, values between 0.6 and 0.8 suggest expanded coils in good solvents, and higher values indicate increasingly rigid or rod-like structures.

Question 3

How is intrinsic viscosity experimentally measured in the laboratory?

Accepted Answer

Intrinsic viscosity is determined using capillary viscometers by measuring flow times of polymer solutions at different concentrations. The specific viscosity changes are then extrapolated to zero concentration to obtain intrinsic viscosity, which reflects the effective volume occupied by a polymer coil in solution.

Question 4

What is the principle behind gel permeation chromatography for determining molar mass distribution?

Accepted Answer

Gel permeation chromatography separates polymer chains by size as they pass through columns packed with porous beads. Larger molecules elute first because they cannot enter smaller pores, while smaller molecules penetrate the pores and elute later, providing a detailed molar mass distribution profile of the polymer sample.

Question 5

Why do polymer samples have a range of molar masses rather than a single value?

Accepted Answer

Polymer samples consist of macromolecular chains with varying lengths, resulting in a distribution of molar masses. Conventional descriptors like number-average and weight-average molar mass quantify this distribution, but they do not fully capture how polymer behavior changes in solution due to chain coiling and viscosity effects.

Question 6

How does intrinsic viscosity relate to polymer molar mass?

Accepted Answer

Intrinsic viscosity is the extrapolated specific viscosity at zero concentration and reflects the effective volume occupied by a polymer coil. The dependence of intrinsic viscosity on molar mass is described by the Mark–Houwink relationship, which uses system-specific constants to connect viscosity measurements to molecular size.

Question 7

What information do the constants K and 'a' provide in polymer characterization?

Accepted Answer

In the Mark–Houwink equation, the constant K reflects polymer–solvent interactions specific to the system being studied. The exponent 'a' provides structural insight into chain conformation, revealing whether the polymer adopts flexible coils, expanded coils, or rigid rod-like structures depending on solvent conditions.

고분자 몰 질량의 결정 II

Browse More Videos