13.4
IR-spectrometers
Er zijn twee belangrijke infrarood (IR) spectrofotometers: dispersieve IR-spectrometers en Fourier Transform-infrarood (FTIR) spectrometers. In een di…
In a dispersive infrared spectrometer, the radiation produced by the hot wire is divided by mirrors into two parallel equal intensity beams that pass through the reference and sample cells.
Its monochromator consists of a beam chopper that passes the beams alternately towards a slowly rotating diffraction grating prism which varies the frequency or wavelength of the radiation.
A thermocouple detector senses the intensity ratio of both of the beams.
Finally, the signal from the detector is amplified, and the recorder draws the spectrum.
A Fourier transform infrared spectrometer involves an interferometer, wherein the radiation passes through a beam splitter, a fixed mirror, and a moving mirror, before it reaches the sample.
The beam splitter separates the beam into deflected and undeflected radiations, which are allowed to fall on fixed and moving mirrors, respectively.
The two beams recombine at the splitter to produce an interference pattern or an interferogram containing a wide range of wavelengths or frequencies.
The detector detects the interferogram modified by the sample, and the computer extracts the individual frequencies using the Fourier transform operation.
View the full transcript and gain access to JoVE Core videos
Q1: How does a dispersive IR spectrometer separate different wavelengths of radiation?
A dispersive IR spectrometer uses a monochromator containing a rapidly rotating beam chopper and diffraction grating to separate radiation into different frequencies. The beam chopper alternates sample and reference beams toward the grating, which varies the wavelength of radiation reaching the thermocouple detector. This process records the spectrum in the frequency domain as the grating rotates.
Q2: What is the role of the beam splitter in an FTIR spectrometer?
In an FTIR spectrometer, the beam splitter is a mirror positioned at 45° to incoming radiation that separates the beam into deflected and undeflected radiations. These separate beams travel to fixed and moving mirrors, then recombine at the splitter. The recombination creates an interferogram containing both constructive and destructive interference patterns due to path length differences.
Q3: How does constructive interference differ from destructive interference in FTIR?
Constructive interference occurs when the peaks of two waves align, increasing the amplitude of the combined wave. Destructive interference happens when one wave's peak aligns with another's trough, canceling each other and reducing amplitude. Both interference patterns are present in the interferogram produced by the FTIR beam splitter and mirrors.
Q4: What does the thermocouple detector measure in a dispersive IR spectrometer?
The thermocouple detector measures the intensity ratio between the sample and reference beams after they pass through the monochromator. This ratio is then amplified and recorded to create the final spectrum. The detector's measurement allows the spectrometer to quantify how much infrared radiation the sample absorbs at each wavelength.
Q5: How does the Fourier transform process extract frequency information in FTIR?
The detector in an FTIR spectrometer captures the interferogram modified by the sample, which contains a wide range of wavelengths and frequencies combined together. A computer then applies the Fourier transform operation to mathematically separate and extract the individual absorption frequencies from this complex interferogram data.
Q6: Why are FTIR spectrometers preferred over dispersive IR spectrometers?
FTIR spectrometers are preferred because they operate faster and provide greater sensitivity compared to dispersive IR spectrometers. The FTIR design allows simultaneous measurement of all wavelengths through the interferogram, whereas dispersive spectrometers measure frequencies sequentially as the diffraction grating rotates.
Q7: How do the reference and sample beams function in a dispersive IR spectrometer?
In a dispersive IR spectrometer, infrared radiation from a hot wire is divided by mirrors into two parallel equal-intensity beams. One beam passes through the sample while the other serves as a reference. The thermocouple detector compares their intensities after passing through the monochromator, enabling measurement of sample absorption.