11.16
lichaamstemperatuur beoordelen: oksel
Procedurele gids voor het beoordelen van de lichaamstemperatuur van de oksel met behulp van een digitale thermometer:
Stap 1: Voer handhygiëne uit en t…
Here is a guide on measuring axillary temperature with a digital thermometer.
Before measuring the temperature, perform hand hygiene and put on a clean pair of gloves.
First, prepare the patient by explaining the procedure, providing privacy, ensuring the axilla is exposed, and explaining that a correct reading requires minimal movement.
Next, position the patient by having them lie on their back with their arm slightly elevated and the elbow flexed.
For accurate results and to lower the risk of infection, clean the armpit using an alcohol swab and allow it to dry naturally.
To take a reading, place the digital thermometer in the armpit, then have the patient hold their arm across their torso while resting their hand on or above the opposite shoulder. Offer assistance if needed.
Remove the thermometer upon hearing the beep sound, note the reading, and clean it with an alcohol swab.
Ensure patient comfort during and after temperature assessment by close monitoring.
Lastly, remove the gloves, perform hand hygiene, and document the procedure.
View the full transcript and gain access to JoVE Core videos
Q1: What is the correct patient positioning for axillary temperature measurement?
Position the patient lying on their back with their arm slightly elevated and the elbow flexed. After placing the thermometer probe in the center of the axilla, instruct the patient to lower their arm and press it close to their body to surround the probe with skin, ensuring reliable measurement and accurate results.
Q2: Why is cleaning the axilla important before temperature assessment?
Cleaning the armpit with an alcohol swab and allowing it to dry naturally reduces infection risk and ensures accurate readings. This infection control step removes contaminants from the skin surface, which can interfere with thermometer accuracy and compromise patient safety during vital signs assessment.
Q3: How should you prepare a patient before measuring axillary temperature?
Explain the procedure to ensure understanding and cooperation, provide privacy, and expose only the axilla to minimize exposure while keeping the patient warm. Inform the patient that minimal movement is crucial for an accurate reading and offer assistance as needed throughout the measurement process.
Q4: What infection control measures should be taken during axillary temperature assessment?
Perform hand hygiene and put on clean gloves before the procedure to prevent cross-contamination. After measurement, dispose of the disposable probe cover by ejecting it directly into a waste receptacle to avoid reuse, then remove gloves and perform hand hygiene again to maintain infection control standards.
Q5: Where exactly should the thermometer probe be placed in the axilla?
Place the thermometer probe in the center of the axilla, the deepest part, for the most accurate reading. Raise the patient's arm away from their torso to expose the axilla fully before probe insertion, ensuring proper contact with skin tissue for reliable temperature measurement.
Q6: What steps should follow after the thermometer beeps during axillary measurement?
Carefully remove the probe and note the temperature reading. Cover the patient, dispose of the probe cover into a waste receptacle, and replace the thermometer in the charging unit to prepare it for next use. Remove gloves, perform hand hygiene, and document the findings, informing the provider of any abnormalities detected.
Q7: How does probe cover attachment prevent contamination during temperature measurement?
Attaching a disposable probe cover securely to the thermometer probe prevents direct contact between the probe and patient skin, reducing cross-contamination risk. After measurement, the cover is ejected directly into a waste receptacle, ensuring single-use application and maintaining infection control standards throughout the assessment procedure.