Het Hall-effect

When a magnetic field is applied perpendicular to a current-carrying conductor, the moving electrons experience a magnetic force that deflects them to one side. This charge accumulation creates an electric field opposing further electron drift. At equilibrium, the electric force balances the magnetic force, establishing a potential difference called the Hall voltage across the conductor's width.

The polarity of the Hall voltage indicates the type of charge carrier in a conductor. Edwin Hall's 1879 experiment demonstrated that the voltage's direction shows whether electrons or positive charges dominate charge transport. This was historically significant because it first proved that charge carriers in most metals are negative, not positive.

A crossed-field situation occurs when electric and magnetic fields are perpendicular to one another. In the Hall effect, the magnetic field deflects charge carriers while the resulting electric field opposes this deflection. At equilibrium, these perpendicular fields balance each other, preventing further charge carrier movement across the conductor.

Hall probes measure unknown magnetic field magnitudes using the Hall voltage and the conductor's known parameters, including charge carrier density and current. By measuring the voltage generated across the conductor, researchers can calculate the magnetic field strength. This application is essential in research laboratories where electromagnets require precise field regulation.

The Hall voltage can be expressed in terms of drift velocity, current, and the conductor's cross-sectional area. By relating drift velocity to current, the Hall voltage becomes a measurable quantity that reveals the number density of charge carriers. This mathematical relationship enables researchers to determine carrier concentration from voltage measurements.

Electrons moving through a conductor experience a deflecting magnetic force perpendicular to both their motion and the magnetic field direction. This force pushes electrons toward one edge of the conductor, creating excess negative charge there and leaving positive charge on the opposite side. The charge separation continues until the resulting electric field generates a force that balances the magnetic force.

Hall probes are used as part of electronic circuits to regulate and monitor magnetic field strength in electromagnets. They measure the Hall voltage to determine field magnitude continuously, ensuring the field remains steady and precise during experiments. This application is critical in research laboratories requiring highly controlled magnetic field conditions.