10.9
Redoxtitratie: andere oxiderende en reducerende middelen
Naast jodium kunnen andere oxiderende of reducerende middelen dienen als titranten in redoxtitraties. Veelvoorkomende oxiderende titranten zijn KMnO_4…
In addition to iodine, several other oxidizing or reducing agents can be employed as titrants in redox titrations.
Potassium permanganate is a strong oxidizing titrant that reduces from manganese(VII) to manganese(II) in a strongly acidic solution.
Here, the purple permanganate acts as a self-indicator because manganese(II) is colorless.
Reducing analytes can also be titrated using acidic cerium(IV) solutions while using redox indicators for end point detection. In the titration, the analyte is oxidized while cerium(IV) reduces to cerium(III).
Potassium dichromate is a moderately strong oxidizing titrant that reduces from chromium(VI) to chromium(III) in acidic solutions. The dichromate end point is observed using a redox indicator.
In contrast, most reducing titrants are oxidized by atmospheric oxygen, so they are rarely used for the direct titration of oxidizing analytes.
For instance, thiosulfate is used indirectly as a typical reducing titrant for iodometric titrations.
However, an acidified iron(II) solution can be used to titrate some strong oxidizing analytes, such as cerium(IV), chromium(VI), and vanadium(V).
View the full transcript and gain access to JoVE Core videos
Q1: Why is potassium permanganate used as a self-indicator in redox titrations?
Potassium permanganate acts as a self-indicator because it changes color during the reaction. The purple permanganate reduces to colorless manganese(II) in acidic solutions, making the endpoint visually obvious when the purple color persists, indicating all analyte has been oxidized and the titration is complete.
Q2: What is the difference between potassium permanganate and potassium dichromate as oxidizing titrants?
Potassium permanganate is a strong oxidizing titrant that reduces from manganese(VII) to manganese(II) and serves as a self-indicator due to its color change. Potassium dichromate is a moderately strong oxidizing titrant that reduces from chromium(VI) to chromium(III) and requires a redox indicator for endpoint detection since its color change is insufficient.
Q3: How does cerium(IV) function in the titration of reducing analytes?
Acidic cerium(IV) solutions oxidize reducing analytes while cerium(IV) itself reduces to cerium(III). Since this reaction lacks a distinctive color change, redox indicators are employed for endpoint detection to signal when the titration is complete and all analyte has been oxidized.
Q4: Why are most reducing titrants unsuitable for direct titration of oxidizing analytes?
Most reducing titrants are readily oxidized by atmospheric oxygen, making them unstable for direct titrations of oxidizing analytes. However, acidified iron(II) solutions can titrate strong oxidizing analytes like cerium(IV), chromium(VI), and vanadium(V) because iron(II) remains sufficiently stable under acidic conditions.
Q5: What role do redox indicators play in dichromate titrations?
Potassium dichromate titrations require redox indicators because dichromate's color change is not sufficiently distinct for reliable endpoint detection without additional chemical assistance. These indicators provide a clear visual signal when the titration reaches completion, ensuring accurate results in analytical measurements.
Q6: How is thiosulfate used as a reducing titrant in iodometric titrations?
Thiosulfate is used indirectly as a reducing titrant in iodometric titrations because it is readily oxidized by atmospheric oxygen, making direct titration impractical. This indirect approach through redox titration iodimetry and iodometry allows thiosulfate to effectively determine oxidizing analytes despite its instability.
Q7: What factors determine the choice of oxidizing titrant in a redox titration?
The choice of oxidizing titrants depends on stability, cost, analyte strength, and reaction rate between the analyte and titrant. Permanganate provides self-indication, cerium(IV) works with redox indicators, and dichromate offers moderate oxidizing strength, each suited to different analytical requirements and sample compositions.