10.15
Gecontroleerde-stroomcoulometrie: overzicht
Gecontroleerde-stroomcoulometrie, ook wel amperostatische coulometrie genoemd, is een techniek die wordt gebruikt in elektrochemische analyse om de ho…
Controlled-current coulometry, or amperostatic coulometry, uses a constant current for fast, straightforward analysis of the total charge produced during electrolysis by multiplying the current by the electrolysis time.
The setup includes a galvanostat, a two-electrode electrochemical cell, a clock for measuring the electrolysis time, and a switch to start and stop the process.
The analyte and electrolysis products on the counter electrode are separated with a salt bridge or porous frit.
Galvanostats are used because, during electrolysis, the analyte's declining concentration would cause the current to drop because fewer electrons are being generated.
So, the cell potential must be increased to maintain a constant current. However, other reactions may start at the generator electrode, and such reactions can reduce the current efficiency.
A 100% current efficiency can be achieved by adding an excess of a mediator, which produces ions that react quantitatively with the remaining analyte.
Alternatively, externally generated oxidizing or reducing reagents can be used.
The endpoint of the reaction can be indicated by visual indicators or through potentiometric or conductometric measurements.
View the full transcript and gain access to JoVE Core videos
Q1: How does controlled-current coulometry measure the quantity of an analyte?
Controlled-current coulometry applies a constant current to an electrochemical cell, causing the analyte to undergo a redox reaction at the electrode surface. By measuring the time required for charge transfer and multiplying current by electrolysis time, the total charge is calculated. Using Faraday's laws of electrolysis, this charge directly determines the quantity of analyte present in the sample.
Q2: What is the role of a galvanostat in controlled-current coulometry?
A galvanostat maintains constant current throughout electrolysis by automatically adjusting cell potential. As analyte concentration decreases during the reaction, fewer electrons are generated, which would normally cause current to drop. The galvanostat compensates by increasing cell potential, ensuring steady current flow and accurate charge measurement for reliable quantitative analysis.
Q3: Why might current efficiency decrease during controlled-current coulometry?
Current efficiency can decrease when undesired reactions occur at the generator electrode, competing with the primary analyte reaction. These parasitic reactions consume current without contributing to analyte analysis. To achieve 100% current efficiency, an excess mediator can be added to generate ions that react quantitatively with the remaining analyte, or externally generated oxidizing and reducing agents can be used.
Q4: How does external titrant generation improve controlled-current coulometry?
External titrant generation produces the titrant in a separate electrolytic cell and delivers it to the titration vessel, offering precise control and addressing electrode interference issues. For acid titrations, the cathode produces hydroxide ions; for base titrations, the anode produces hydrogen ions. This approach minimizes dilution effects and enables accurate titrations of large-scale samples with controlled current coulometry coulometric titration methods.
Q5: What are common examples of externally generated titrants in coulometry?
Common examples include iodine generated by electrolyzing potassium iodide solution at the anode, and Ce4+ ions produced from Ce3+ in aqueous solution. Hydroxide and hydrogen ions are also generated for acid-base titrations. Each titrant is produced electrochemically in a separate cell and delivered to the titration vessel, enabling precise redox reactions with the analyte.
Q6: How is the endpoint determined in controlled-current coulometry?
The reaction endpoint can be detected using visual indicators that change color when the analyte is consumed. Alternatively, potentiometric measurements monitor electrode potential changes, or conductometric measurements track solution conductivity changes. These methods signal when the titration is complete, allowing accurate determination of the total charge passed and analyte quantity.
Q7: What components make up a typical controlled-current coulometry setup?
A typical setup includes a galvanostat to maintain constant current, a two-electrode electrochemical cell containing the analyte, a timer to measure electrolysis duration, and a switch to initiate and halt the process. A salt bridge or porous frit separates the analyte from electrolysis products on the counter electrode, preventing unwanted reactions and ensuring accurate charge measurement.