Question 1

What is the equivalent circuit model of an operational amplifier?

Accepted Answer

An op-amp equivalent circuit consists of an input section with input resistance Ri and differential input voltage (vd), a voltage-controlled source that amplifies vd by open-loop gain A, and an output section with a voltage-controlled source in series with output resistance Ro. This model represents how an op-amp processes the difference between inverting and non-inverting terminal voltages.

Question 2

How does negative feedback affect op-amp operation?

Accepted Answer

Negative feedback occurs when the output is fed back to the inverting terminal, creating a closed-loop gain that differs from the open-loop gain. This feedback path ensures the op-amp operates within its linear range by reducing the differential input voltage, preventing saturation and enabling stable, predictable circuit behavior.

Question 3

What are the three operating modes of an operational amplifier?

Accepted Answer

An op-amp operates in positive saturation when output voltage reaches VCC, negative saturation when it reaches -VCC, or linear region when the differential input voltage remains within acceptable bounds. The power supply voltage determines the saturation limits, and the op-amp transitions between modes based on input magnitude.

Question 4

What defines an ideal operational amplifier?

Accepted Answer

An ideal op-amp has infinite open-loop gain, infinite input resistance, zero output resistance, zero input offset voltage, and zero input terminal currents. It also possesses infinite bandwidth and infinite slew rate, enabling it to amplify signals of any frequency and change output voltage instantaneously without limitations.

Question 5

How does open-loop gain differ from closed-loop gain?

Accepted Answer

Open-loop gain is the amplification factor when no external feedback path exists from output to input. Closed-loop gain is the resulting voltage ratio when feedback is applied, typically through the inverting terminal. Closed-loop gain is generally lower but more stable and predictable than open-loop gain.

Question 6

What happens when an op-amp input voltage exceeds its linear range?

Accepted Answer

When the differential input voltage exceeds the linear range, the op-amp saturates and output voltage becomes limited to either VCC or -VCC, regardless of further input increases. The power supply voltage determines these saturation limits, and the op-amp cannot amplify beyond this point.

Question 7

Why are modern op-amps approximated as ideal amplifiers?

Accepted Answer

Modern operational amplifiers have sufficiently large open-loop gains and input resistances, combined with negligible output resistance, that they closely approximate ideal op-amp behavior. This approximation simplifies circuit analysis while maintaining accuracy for most practical applications in inverting and non inverting opamps configurations.

Kenmerken van Op-amp

Browse More Videos