20.16
Algemeen geval van excentrische axiale belasting
Asymmetrische buiging vindt plaats wanneer het buigmoment dat op een structureel onderdeel wordt uitgeoefend, niet op één lijn ligt met de hoofdas erv…
Consider a member subjected to equal and opposite eccentric forces. These forces are applied at a horizontal distance of a and a vertical distance of b from the principal centroidal axis of the member.
Each eccentric force is equal to the centric force and two couple moments with moments arms being distance a and b from the principal centroidal axis of the member.
Using the Saint-Venant principle, the equivalent loadings can be used to determine the distribution of the stress at the section of the member. The analysis holds when the section is not close to either end of the member.
The superposition principle determines the stresses due to centric forces and the bending couples, and shows that the stress varies linearly along the section.
Depending on the geometry of the member and the line of action of the eccentric loadings, the total stress may have the same or opposite sign throughout the section. The line along the section for which the stress magnitude is zero is known as the neutral axis of the section.
View the full transcript and gain access to JoVE Core videos
Q1: How do eccentric forces differ from centric forces in axial loading?
Eccentric forces are applied at a horizontal distance a and vertical distance b from the principal centroidal axis, creating couple moments in addition to axial stress. Centric forces pass through the centroid and produce only uniform axial stress. Using the superposition principle, eccentric loading combines axial stress from the centric component with bending stresses from the couple moments, resulting in a more complex stress distribution across the section.
Q2: What is the neutral axis in eccentric axial loading?
The neutral axis is the line along the cross-section where stress magnitude equals zero. In eccentric loading, the neutral axis does not necessarily align with the geometric axes of the section. Its position is determined by ensuring the sum of normal stresses across the section equals zero, and it depends on the relationship between applied load eccentricity and the geometric properties of the cross-section.
Q3: How does the Saint-Venant principle apply to eccentric axial loading analysis?
The Saint-Venant principle allows equivalent loadings to replace eccentric forces with a centric force and couple moments. This decomposition enables stress analysis at sections away from the load application point. The principle holds when the section is not close to either end of the member, allowing engineers to use superposition to determine total stress from axial and bending components separately.
Q4: Why does stress vary linearly across a section under eccentric loading?
Stress varies linearly because the superposition principle combines linear stress distributions from the centric force and bending couples. The centric component produces uniform stress, while bending moments create linearly varying stress. The total stress at any point is the algebraic sum of these components, maintaining linear variation across the section.
Q5: Can total stress have the same sign throughout an eccentric loading section?
Yes, depending on the member geometry and eccentricity magnitude, total stress may be entirely tensile, entirely compressive, or mixed throughout the section. When the neutral axis lies outside the cross-section, all stresses share the same sign. When the neutral axis passes through the section, stresses change sign, with tension on one side and compression on the other.
Q6: What role does the product of inertia play in unsymmetrical bending stress analysis?
The product of inertia measures the covariance of area element coordinates relative to the axes and is essential for determining stress distribution in unsymmetrical bending. When axes align with the centroidal axes of the section, the product of inertia simplifies calculations and the neutral axis coincides with these principal axes, making stress analysis more straightforward.
Q7: How do couple moments from eccentricity affect bending in multiple directions?
Eccentric forces create couple moments with moment arms equal to distances a and b from the principal centroidal axis, causing bending about multiple axes simultaneously. These moments counteract the eccentricity of the forces and result in complex three-dimensional stress distributions. The combined effect of moments about different axes determines the final stress state and neutral axis orientation.